FS9. FSX & P3D CTD Guide - NEW!
FSX / P3D Configuration Guide - UPDATED!
Simulation's Premier Resource!
AVSIM is a free service to the flight and simulation communities. Please help us keep it that way. Donate what you can today! Thank you for your support!
I just bought FS2CREW for FSX Default 747, but.. the 2...
11 replies to this topic
Please donate today!
Posted 30 August 2008 - 02:05 PM
>Hi,>>Sorry for the delayed response.>>GPS: You'll need to look in the FSX manual for info on how to>use the default GPS.>>Pre Flight Checklist: FS2Crew activated? Yellow dot visible>above PF?>>Cheers,>BryanHi I Have the same Problem With The Pre Flight Checklist the Yellow Dot Is Visible And FS2Crew Is Activated. Please Help.Rob.
Posted 14 March 2008 - 07:51 PM
>Hi,>>Please send me your 747's panel.cfg file:>>firstname.lastname@example.org>>That way I know if FS2Crew has been added to your 747.>>Cheers,>Bryan>>Hello Bryan,thank you for writing me back.. Finally, I figured it out... its working great.. but i CANT GET Pre flight check list.. i press main button on PF no good...... i m confused about gps.. where do we enter the info?
Posted 13 March 2008 - 01:26 AM
>Hey there,>>thank for the info...>>Today, I reinstall the FSX completely... then I reinstall>747 default fs2crew. when it loads the normal 747 panel is>there w/o fs2crew panel...>>what else can i do? i dont want to waaste it.. >Also i reinstalled fs2crew after fsx was reinstalled..
Posted 11 March 2008 - 09:52 PM
Hi,You read the manual, so that's not the issue.Please take a look at your panel.cfg file for the 747.Do you see a bunch of FS2Crew entries on it?If you don't, it means the FS2Crew installer was unable to locate the panel.cfg file for your 747.This is a result of usually having an invalid FS registry entry, which is a very common problem.Please run the free FS registry repair tool from here:http://www.flight1.c...sp?page=libraryThen re-install FS2Crew.At this point that's my possible solution.Let me know if it helps.Cheers,Bryan
Posted 11 March 2008 - 09:38 PM
I follow the installation directions and everything.. I can get the VC view. but I can't the panals with FS2crew. I reinstalled it twice and when the FS2crew is not installed the 747 panel is there and working.. Also, when i try switch livery 747 all of my 747's planes are gone.. thats when FS2Crew is installed.. Please help..