Jump to content
Sign in to follow this  
byork

17 January: FS2Crew iFly Version 2.3 Released

Recommended Posts

Attention FS2Crew iFly 737 users:

 

 

NOTAM:

 

22 January 2014

 

Version 2+ of FS2Crew for the iFly 737 NGX is ready!

 

 

 

Important:

 

THIS UPDATE IS NOT BUILT INTO THE MAIN INSTALLER.

 

THE INFORMATION IN THIS THREAD SUPERCEDES ANY ASSOCIATED INFORMATION IN THE MAIN OPS PDF MANUAL (ESPECIALLY WITH RESPECT TO 'BUTTON VERSION' JOYSTICK AND KEYBOARD ASSIGNMENTS). 

 

 

 

Download link:

 

http://fs2crew.com/cart/Updates/FS2CrewIFlyV2.zip

 

 

Change Log Version 2.4 (FSX Button Control Only):

 

1. Updates the FSX Button Control only.  Corrects problem associated with pre-flight sounds playing during Securing flow.

 

 

Change Log Version 2.3:

 

1. Updates the FSX version only.  The FS9 version does not require updating.

2. On-line Google MAP functionality removed since it interfered with the BBJ models and caused erratic behavior.

3. Countdown timer display now visible again on the Main Panel.

 

 

Change Log Version 2.2A:

 

1. Updates the FSX/FS9 Button Control versions only.  Fixes an issue associated with below Sea Level Airports which would produce a CTD when the Descent Checklist was read back.

 

 

Change Log Version 2.2:

 

1. FA Cabin announcements restored.

 

 

Change Log Version 2.1:

 

1. The Green Bar in the FSX Voice version control is now working again.

 

2. A couple other minor bug fixes.  

 

 

Change Log Version 2.0:

 

1. FS2Crew iFly is now compatible with the iFly Features Pack (RTO during After Takeoff Flow and the Trans Alt/Level button on the FO's side).

 

2. FSX Voice Control Version only:  You can now view yourself on FS2Crew's on-line Map:  

 

http://fs2.fs2crew.com:8080/SimpleTracker/map.do

 

3. Video Marshaller now works in Windows 8.

 

4. The product should now function in Prepar 3D.  Note that the FS2Crew installer does not support P3D.  You will need to manually move the FS2Crew files and folder to P3D.

 

5. Numerous code improvements.  You should no longer experience any volume changes when you switch views.

 

6. BBJ Models:  After Landing flow will no longer trigger the TCAS test.

 

7. After Landing flow:  FO will turn on taxi light prior to turning off landing lights.

 

8. New "Soft Mute" assignment system.  You now need to assign a key or joystick button to "PROP SYNC" for Soft Mute (same assignment as used in the NGX).

 

mute1.jpg

 

 

 

9. For "Button Control" users, the key assignments for the Main and Secondary Button have been updated to match those used in FS2Crew NGX:

 

MAIN BUTTON:

 

ALTERNATE STATIC SOURCE ON/OFF

 

mute2.jpg

 

 

 

SECONDARY BUTTON:

 

PROPELLER SYNC ON/OFF

 

mute1.jpg

 

 

 

10. You can now toggle open/close the FS2Crew Main Panel using this assignment:

 

AUTOFEATHER ARM/OFF

 

autofeather2.jpg

Share this post


Link to post
Share on other sites

Same to me, after installing Update FSX crashes to Desktop. Don't know the reason, installed as Admin with UAC and GDATA Antivirus disabled.  Got the following Error Post.

 

Name der fehlerhaften Anwendung: fsx.exe, Version: 10.0.61637.0, Zeitstempel: 0x46fadb14

Name des fehlerhaften Moduls: MSVCR90.dll, Version: 9.0.30729.6161, Zeitstempel: 0x4dace5b9

Ausnahmecode: 0xc0000005

Fehleroffset: 0x0002463e

ID des fehlerhaften Prozesses: 0x11f0

Startzeit der fehlerhaften Anwendung: 0x01ce2e46d41cdd37

Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe

Pfad des fehlerhaften Moduls: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCR90.dll

Berichtskennung: f82e55e8-9a3a-11e2-af65-00261887ae94

 

 

And another funny thing happens, when I click on the artificial horizon to start FS2Crew Voice, after a short time my DVD Rom starts running and then the error message occurs.

Share this post


Link to post
Share on other sites

Has  anyone tried the update on Prepar3D.    I have tried but it crashes much the same as it did on vers. 1.2

Share this post


Link to post
Share on other sites

Same to me, after installing Update FSX crashes to Desktop. Don't know the reason, installed as Admin with UAC and GDATA Antivirus disabled.  Got the following Error Post.

 

Name der fehlerhaften Anwendung: fsx.exe, Version: 10.0.61637.0, Zeitstempel: 0x46fadb14

Name des fehlerhaften Moduls: MSVCR90.dll, Version: 9.0.30729.6161, Zeitstempel: 0x4dace5b9

Ausnahmecode: 0xc0000005

Fehleroffset: 0x0002463e

ID des fehlerhaften Prozesses: 0x11f0

Startzeit der fehlerhaften Anwendung: 0x01ce2e46d41cdd37

Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe

Pfad des fehlerhaften Moduls: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCR90.dll

Berichtskennung: f82e55e8-9a3a-11e2-af65-00261887ae94

 

 

And another funny thing happens, when I click on the artificial horizon to start FS2Crew Voice, after a short time my DVD Rom starts running and then the error message occurs.

 

 

Try re-installing... the MSVCR90.dll suggests maybe you need to reinstall the VS2008 end user runtimes:

 

http://www.microsoft.com/en-us/download/details.aspx?id=5582

Share this post


Link to post
Share on other sites

I have a problem, I downloaded the new service pack and ran FSX and opened the main panel, But when I open the configuration panel My mouse pointer bugs out, that little around blue thinking circle Continuingly shutters And I can't stop until I exit flight simulator. This didn't happen before I downloaded the service pack. I also tried uninstalling the program and reinstalling it but it didn't work. I made a video to show you exactly what's happening. http://www.youtube.com/watch?v=4zpry0TnTNQ

Share this post


Link to post
Share on other sites

Thanks for the video.

 

It helps when I can see it.

 

However, I'm afraid I can't explain that.

 

I suggest going back to the pre Version 2 version in the meantime.


 

What's soft mute?

 

 

Soft Mute is used when you don't want the FO to "act" on anything the speech recognition system "hears".

 

Example:  You're on VATSIM talking to on-line ATC... you might want to enable Soft Mute when talking to ATC so the FO doesn't start trying to do anything based on what he hears you saying to ATC.

 

Cheers,


 

Share this post


Link to post
Share on other sites

Thanks for the video.

 

It helps when I can see it.

 

However, I'm afraid I can't explain that.

 

I suggest going back to the pre Version 2 version in the meantime.

 ok i uninstalled fs2crew and reinstalled it without the SP but its still doing the same thing. after i re instatlled it i rebooted and i even unattached the gauge from the ifly uneing the iFly Configuration Manager, but now luck.

Share this post


Link to post
Share on other sites

I had the issue when its trying to load the windows too big for the screen... Try resizing the windows in the panel.cfg should look like this. 

 

 

[Window22]
size_mm=1196, 56
pixel_size=1196, 56
window_size= 0.333, 0.874
position=3
visible=0
ident=1000
zorder=100
Sizeable=0
gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_MainPanel, 0,0,1196,56
gauge01=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Audio, 20,20,5,5
gauge02=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Input, 30,30,5,5
 
[Window23]
size_mm=866, 212
window_size= 0.333, 0.874
pixel_size=866, 212
position=4
visible=0
ident=1001
zorder=101
Sizeable=0
gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_AudioSetup, 0,0,866,66
gauge01=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_PreFlight, 0,66,866,62
gauge02=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Pushback, 0,128,866,84
 
[Window24]
size_mm=681, 110
window_size= 0.333, 0.874
pixel_size=681, 110
position=6
visible=0
ident=2777
zorder=102
Sizeable=0
gauge00=FSVideoMarshaller\Gauge\FSVM!Marshaller, 0,0,681,110
 
[Window25]
size_mm=284, 500
window_size= 0.333, 0.874
pixel_size=284, 500
position=6
visible=0
ident=1003
zorder=103
Sizeable=0
gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_PAPanel, 0,0,284,500
 
[Window26]
size_mm=309, 162
window_size= 0.333, 0.874
pixel_size=309, 162
position=6
visible=0
ident=1004
zorder=104
Sizeable=0
gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_FADialog, 0,0,309,162
 
[Window27]
size_mm=330, 681
window_size= 0.333, 0.874
pixel_size=330, 681
position=6
visible=0
ident=1005
zorder=104
Sizeable=0
gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_BriefPanel, 0,0,330,681
 
 
Add the bold line into each window. Make a backup of your origional panel.cfg first, in case this doesnt work.

Kacper Nowotynski

Share this post


Link to post
Share on other sites

I had the issue when its trying to load the windows too big for the screen... Try resizing the windows in the panel.cfg should look like this. 

 

 

[Window22]

size_mm=1196, 56

pixel_size=1196, 56

window_size= 0.333, 0.874

position=3

visible=0

ident=1000

zorder=100

Sizeable=0

gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_MainPanel, 0,0,1196,56

gauge01=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Audio, 20,20,5,5

gauge02=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Input, 30,30,5,5

 

[Window23]

size_mm=866, 212

window_size= 0.333, 0.874

pixel_size=866, 212

position=4

visible=0

ident=1001

zorder=101

Sizeable=0

gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_AudioSetup, 0,0,866,66

gauge01=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_PreFlight, 0,66,866,62

gauge02=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_Pushback, 0,128,866,84

 

[Window24]

size_mm=681, 110

window_size= 0.333, 0.874

pixel_size=681, 110

position=6

visible=0

ident=2777

zorder=102

Sizeable=0

gauge00=FSVideoMarshaller\Gauge\FSVM!Marshaller, 0,0,681,110

 

[Window25]

size_mm=284, 500

window_size= 0.333, 0.874

pixel_size=284, 500

position=6

visible=0

ident=1003

zorder=103

Sizeable=0

gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_PAPanel, 0,0,284,500

 

[Window26]

size_mm=309, 162

window_size= 0.333, 0.874

pixel_size=309, 162

position=6

visible=0

ident=1004

zorder=104

Sizeable=0

gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_FADialog, 0,0,309,162

 

[Window27]

size_mm=330, 681

window_size= 0.333, 0.874

pixel_size=330, 681

position=6

visible=0

ident=1005

zorder=104

Sizeable=0

gauge00=FS2Crew2010\Versions\IFly737\Gauges\FS2CrewIFly737!FS2Crew_BriefPanel, 0,0,330,681

 

 

Add the bold line into each window. Make a backup of your origional panel.cfg first, in case this doesnt work.

Where do I find these settings so I can change the, it it the fsx.cfg?

Share this post


Link to post
Share on other sites

If you navigate to your fsx folder, then go to simobjects, aircraft,  then go to IFLY aircraft you want to fly folder, you will see panel.cfg.. make a copy then open it and scroll all the way down where you see the panels for the fs2crew windows. 


Kacper Nowotynski

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...