Help to improve my Tileproxy

prilete · March 13, 2013

My connection is 10Kbits/seg Download y 600 bits/seg Upload

My Equipo is:

Tipo de equipo ACPI x64-based PC

Sistema operativo Microsoft Windows 7 Ultimate

Service Pack del SO Service Pack 1

Internet Explorer 10.0.9200.16439

DirectX DirectX 11.0

Nombre del equipo PC1-PC

Nombre de usuario PC1

Dominio de inicio de sesión PC1-PC

Fecha / Hora 2013-01-08 / 09:45

Placa base:

Tipo de CPU QuadCore Intel Core i7-920, 2800 MHz (21 x 133)

Nombre de la placa base Gigabyte GA-EX58-UD4 (3 PCI, 1 PCI-E x1, 1 PCI-E x4, 2 PCI-E x16, 6 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394)

Chipset de la placa base Intel Tylersburg X58, Intel Nehalem

Memoria del sistema 12288 MB (DDR3-1333 DDR3 SDRAM)

Tipo de BIOS Award Modular (03/11/10)

Puerto de comunicación Communications Port (COM1)

Pantalla:

Adaptador de video AMD Radeon HD 7800 Series (2048 MB)

Aceleradora 3D AMD Radeon HD 7850 (Pitcairn)

Monitor HP w2558hc (HDMI) [25.5" LCD] (CZQ843052Y)

Monitor LG L226WTQ (Digital) [22" LCD] (1703203664)

Multimedia:

Adaptador de audio ATI Radeon HDMI @ AMD Cape Verde/Pitcairn/Heathrow/Chelsea - High Definition Audio Controller

Adaptador de audio Realtek ALC888 @ Intel 82801JB ICH10 - High Definition Audio Controller

Almacenamiento:

Controlador IDE Controladora estándar PCI IDE de doble canal

Controlador IDE Intel® ICH10R SATA AHCI Controller

Controlador de almacenamiento JMicron JMB36X Controller

Unidad de disco ACTIONS HS USB FlashDisk USB Device

Unidad de disco ACTIONS HS USB FlashDisk USB Device (1953 MB, USB)

My file Proxyuser is:

# Start a line with # to comment it out.

# Turn your text editor's Word Wrapping OFF for editing this document.

#

# Read the manual for help with configuration. Do not contact the

# author about the configuration for particular services. Thank you.

#

[TileProxy]

# Enable or disable worldwide photographic scenery coverage (Yes/True/On to enable)

master_enable=On

# Write a logfile to disk. In recommend to only turn this on for debugging purposes.

# When using FSX RTM or FS 2004, the logfile may grow VERY fast and affect performance.

#logfile="C:\logfile.txt"

# If you have concerns about possible copyright violations by caching JPEG and BMP tiles

# on your hard drive, this switch is the solution. By enabling diskless mode, Tileproxy

# will not store a single tile on your hard drive. Expect higher network usage though.

# Note that offline mode will depend on tiles being available in the cache.

diskless_mode=Off

# Offline Mode - No network access will occur (Yes/True/On to enable)

offline_mode=No

# Resolution limiter: 17 = 30cm/pixel, 16 = 60cm/pixel, 15 = 1.1m/pixel, 14 = 2.3m/pixel, 13 = 4.75m/pixel

# Lower resolutions load faster, but are visually less appealing. The 30cm resolution may only be feasible

# if you have at least 2GB of system memory.

max_lod=17

# The following two settings allow you to tune Tileproxy to not preload specific LOD levels. This can

# be used in conjunction with third party scenery products like "FS Altitude" that provides data only

# up to a specific resolution. If you place this scenery higher than Tileproxy's world folders in the

# scenery library then it will have precedence over Tileproxy for the specific LOD levels that it

# contains. You can then instruct Tileproxy to not preload these low resolution LOD circles because

# they are not needed anyway.

# Lowest LOD ring to automatically preload tiles for. Must not be lower than 8.

preload_min_lod=9

# Lowest LOD ring to automatically preload tiles for. Must not be higher than 17.

preload_max_lod=17

# The maximum number of tile contexts that Tileproxy will send to the filter driver. A context

# is essentially a very fast buffer for graphics data sitting in kernel memory that delivers

# data right into FSX. Each tile context can hold an entire LOD 8...15 tile. Higher values

# mean more use of your precious kernel memory though. The maximum number is 512. Lower if

# you run out of RAM during flight and the PC starts to use the paging file a lot.

max_contexts=512

# Generate Water Mask. This brings back shader-rendered water and allows

# for the use of planes with floats (Goose, Beaver, etc...). If you turn this

# option off, you get the Tileproxy behavior of Beta 5 and earlier versions.

water_mask=On

# Recommendation: FSX users: Use water_blending=on, water_smoothing=off

# to get soft land/water transitions

#

# FS9 users: Use water_blending=off, water_smoothing=on

# to get hard land/water transitions which

# Tileproxy tries to match pixel-exact against coast-lines

#

# Combining water_smoothing and water_blending is discouraged.

# It's slow and gives weird results.

# Use blending techniques to create a soft land/water transition with some

# transparency effect near the shoreline. Compatible with FSX only.

water_blending=On

# The distance in meters that you want land/water blending to extend from the

# shore line. Larger values require more processing. Large values are now possible,

# useful values are up to 2000 meters. Very high values may be detrimental to water

# mask resolution. Loading speed however remains mostly unaffected by this setting.

blend_distance=1500.0

# The rate at which terrain is blended into the water color. 1.0 means a linear

# blending, values > 1.0 blend faster. Values < 1.0 blend slower. This works

# similarly to a Gamma Curve. An exponent of 2 gives a quadratic blend function,

# an exponent of 0.5 results in a square root behavior.

blend_exponent=1.0

# The minimal and maximal transparency of the water. The lower you choose the min value,

# the more reflective the deep water will be. The higher the max value is chosen, the less

# reflective the water will be directly at the shore line. The reflectiveness transitions

# linearly from max to min throughout the distance given by blend_distance from the shore.

# Allowed values are between 0 and 1, and alpha_min should be smaller than alpha_max or

# things may look weird.

# The following alpha_min values will not give you any dithering artifacts on all-water tiles,

# so the use of these is recommended. It is multiples of 16/239 (rounded up slighty)

# 0.0700, 0.1339, 0.2009, 0.2678, 0.3348, 0.4017, 0.4687

# 0.5356, 0.6026, 0.6695, 0.7365, 0.8034, 0.8703, 0.9373

alpha_min=0.2678

alpha_max=0.7

# The water color in hexadecimal RGB notation. Prefix with #. This should be blue

# or greenish blue or some shades of brown, depending on your preference.

# Values of #000000 are discouraged when using water blending - it will result

# in weird behavior at the shorelines.

water_rgb=#000D1A

# Try to smooth land/water boundaries by trying to match the water mask to the image content.

# This is a a somewhat experimental algorithm.

water_smoothing=Off

# The decision threshold for water/land when water_smoothing is enabled. 0 means everything

# will be turned to land, 1 means everything turns to water. Chose some value inbetween.

water_threshold=0.33

# Maximum number of bytes allocated to BMP graphics tiles in RAM at any time (0 for unlimited)

# The value below states 100 MB.

cache_bytes_limit=100000000

# Maximum number of BMP tiles to cache in RAM at any time (0 for no limit).

cache_tiles_limit=100000

# The currently active service is configured here. Only ONE active source please.

# The other source statements should be commented out.

#source=Acme Globe Service

source=Service Example 1

#source=Service Example 3

#source=Service Example 4

# The sources you want to be able to switch from the GUI menu.

# Separate the list entries with | and enclose in quotes. Make sure the

# names specified here are valid services which are defined below.

# You may want to rename the services according to your preference,

# but make sure you replace all occurences of the strings.

menu_sources="Service Example 1|Service Example 3|Service Example 4"

# Experimental API Hooking section. Disable if you see strange crashes and effects.

# Currently we only have the DirectX 9 hook. More hooks are planned.

enable_hooking=No

# The DirectX 9 hook enables the moving map overlay. More features are planned.

enable_dx9hook=No

# A flag whether to show the moving map overlay initially or not.

enable_movingmap=No

# Dimensions and overlay colors of the moving map. Positions are percentages of the screen.

# Width and Height refer to the full 512x512 pixel texture used for the map. To get a round

# map circle, the ratio of width and height should match your screen's aspect ratio (e.g. 4:3)

# Radius is given in the map texture's pixels where one pixel represents a LOD 15 tile. A

# radius of 0 disables the round stencil and shows the entire 512x512 texture. Color is given

# in a hexadecimal ARGB notation.

movingmap_alpha=255

movingmap_color=#ff000000

movingmap_xpos=88

movingmap_ypos=15

movingmap_width=60

movingmap_height=80

movingmap_radius=60

#

# Here begin the service specific configurations

#

# This is new when you specify captcha_module

#

# On encountering HTTP 302 redirects the captcha module will send Internet Explorer's cookies

# stored for the specified service domain to the web server. It will also display whatever web

# page the service redirects you to. This could be a page requiring you to enter a so-called

# captcha. After entering the captcha correctly, the resulting session cookie will be stored as

# a permanent cookie (expiration 1 day) in your IE Cookies folder and sent to the service on

# subsequent requests. You will then be able to use the service as long as you wish, given that

# you correctly enter the captcha dialog which may nag you once every 20 minutes or so.

#

# Explaining the captcha_config arguments:

#

# cookiedomain from captcha_config specifies the domain name for which cookies are stored.

# This might be the service name plus a top level domain like ".com"

#

# cookieurl specifies a HTTP url from which an identifying cookie will be retrieved first, if

# no existing identifying cookie is found. This may be required sometimes to make the captcha

# dialog appear in the first place. This could be the service's front page URL (e.g. a search

# engine)

[Acme Globe Service]

cache_folder=E:\Tileproxy\cache\cache.acme

network_module=libnettile

captcha_module=captchaform

captcha_config="cookiedomain=acmeglobe.com|cookieurl=http://www.acmeglobe.com"

min_level=9

max_level=17

map_version=1

color_hack=No

color_level=0

bulk_extend=25

[service Example 1]

cache_folder=E:\Tileproxy\cache\cache.service1

network_module=libnettile

min_level = 9

max_level = 19

map_version = 1180

level_mapping = 9,10,11,12,13,14,15,16,17,18,19

# Level_mapping = 9,10,11,12,14,14,15,16,17,18,19 más radio HQ (13 -> 14)

# Level_mapping = 9,10,11,14,14,14,15,16,17,18,19 radio aún más en HQ (12,13 -> 14)

color_hack = Sí

color_level = 13

bulk_extend = 50

[service Example 3]

cache_folder=E:\Tileproxy\cache\cache.service3

network_module=libnettile

module_config="conn=20|rate=2.0|verbose=0|server=http://us.maps3.figurethisoutyourself|path=/aerial.maps.figurethisoutyourself/img?x=%x&y=%y&z=%z&v=%v&t=a|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"

min_level=5

max_level=19

map_version=1.8

color_hack=No

color_level=0

bulk_extend=50

[service Example 4]

cache_folder=E:\Tileproxy\cache\cache.service4

network_module=libnettile

min_level=5

max_level=19

map_version=1

color_hack=Yes

color_level=12

bulk_extend=50

I wanted someone to understand me say if you can improve to get sharper images

thanks

01generation60 · March 13, 2013

In your ini file

YOU HAVE

3 Services open

at the lower end where Examples are

[Acme Globe Service]

[service Example 3]

[service Example 4]

You are running on [service Example 1]

Please open you ini file and place # in front of them Leave [service Example 1]

the way it is and save

JohnG3 · March 13, 2013

My connection is 10Kbits/seg Download y 600 bits/seg Upload

....

I wanted someone to understand me say if you can improve to get sharper images

If you read the TileProxy User Manual it says:

"To use this software with good performance, your system should meet or exceed these
recommended system requirements.

Microsoft Flight Simulator 2004 or Flight Simulator X (perferrably SP1 or later)
A 2 Mbit/s Internet connection or faster."

If you actually do have a 10Kb/sec download speed - instead of the recommended 2000Kb/sec, you can expect Tileproxy to more or less freeze up on downloading tiles. Your internet connection cannot keep up with the download speeds required to get any usable images for tileproxy. It sounds like you have a telephone modem internet connection, and need a cable internet connection to get improved performance - sorry..

prilete · March 13, 2013

If you read the TileProxy User Manual it says:

"To use this software with good performance, your system should meet or exceed these

recommended system requirements.

Microsoft Flight Simulator 2004 or Flight Simulator X (perferrably SP1 or later)

A 2 Mbit/s Internet connection or faster."

If you actually do have a 10Kb/sec download speed - instead of the recommended 2000Kb/sec, you can expect Tileproxy to more or less freeze up on downloading tiles. Your internet connection cannot keep up with the download speeds required to get any usable images for tileproxy. It sounds like you have a telephone modem internet connection, and need a cable internet connection to get improved performance - sorry..

Pardon my connections: 10 Mbps

John_Cillis · March 13, 2013

This may help you. It's my proxyuser.ini. It's designed to provide sharp textures out to the horizon if you limit your visibility to 30 miles. It sacrifices the sharpest textures, but looks fairly good from altitudes of 1000 ft. on up.

Regards,

John

__________

#
# Start a line with # to comment it out.
# Turn your text editor's Word Wrapping OFF for editing this document.
#
# Read the manual for help with configuration. Do not contact the
# author about the configuration for particular services. Thank you.
#

[TileProxy]

# Enable or disable worldwide photographic scenery coverage (Yes/True/On to enable)
master_enable=On

# Write a logfile to disk. In recommend to only turn this on for debugging purposes.
# When using FSX RTM or FS 2004, the logfile will grow VERY fast and affect performance.
#logfile="C:\logfile.txt"

# If you have concerns about possible copyright violations by caching JPEG and BMP tiles
# on your hard drive, this switch is the solution. By enabling diskless mode, Tileproxy
# will not store a single tile on your hard drive. Expect higher network usage though.
# Note that offline mode will depend on tiles being available in the cache.
diskless_mode=Off

# Offline Mode - No network access will occur (Yes/True/On to enable)
offline_mode=No

# Resolution limiter: 17 = 30cm/pixel, 16 = 60cm/pixel, 15 = 1.1m/pixel, 14 = 2.3m/pixel, 13 = 4.75m/pixel
# Lower resolutions load faster, but are visually less appealing. The 30cm resolution may only be feasible
# if you have at least 2GB of system memory.
max_lod=15

# The following two settings allow you to tune Tileproxy to not preload specific LOD levels. This can
# be used in conjunction with third party scenery products like "FS Altitude" that provides data only
# up to a specific resolution. If you place this scenery higher than Tileproxy's world folders in the
# scenery library then it will have precedence over Tileproxy for the specific LOD levels that it
# contains. You can then instruct Tileproxy to not preload these low resolution LOD circles because
# they are not needed anyway.

# Lowest LOD ring to automatically preload tiles for. Must not be lower than 8.
preload_min_lod=9

# Lowest LOD ring to automatically preload tiles for. Must not be higher than 17.
preload_max_lod=15

# The maximum number of tile contexts that Tileproxy will send to the filter driver. A context
# is essentially a very fast buffer for graphics data sitting in kernel memory that delivers
# data right into FSX. Each tile context can hold an entire LOD 8...15 tile. Higher values
# mean more use of your precious kernel memory though. The maximum number is 512. Lower if
# you run out of RAM during flight and the PC starts to use the paging file a lot.
max_contexts=512

# Generate Water Mask. This brings back shader-rendered water and allows
# for the use of planes with floats (Goose, Beaver, etc...). If you turn this
# option off, you get the Tileproxy behavior of Beta 5 and earlier versions.
water_mask=On

# Recommendation: FSX users: Use water_blending=on, water_smoothing=off
# to get soft land/water transitions
#
# FS9 users: Use water_blending=off, water_smoothing=on
# to get hard land/water transitions which
# Tileproxy tries to match pixel-exact against coast-lines
#
# Combining water_smoothing and water_blending is discouraged.
# It's slow and gives weird results.

# Use blending techniques to create a soft land/water transition with some
# transparency effect near the shoreline. Compatible with FSX only.
water_blending=On

# The distance in meters that you want land/water blending to extend from the
# shore line. Larger values require more processing. Large values are now possible,
# useful values are up to 2000 meters. Very high values may be detrimental to water
# mask resolution. Loading speed however remains mostly unaffected by this setting.
blend_distance=100.0

# The rate at which terrain is blended into the water color. 1.0 means a linear
# blending, values > 1.0 blend faster. Values < 1.0 blend slower. This works
# similarly to a Gamma Curve. An exponent of 2 gives a quadratic blend function,
# an exponent of 0.5 results in a square root behavior.
blend_exponent=1.0

# The minimal and maximal transparency of the water. The lower you choose the min value,
# the more reflective the deep water will be. The higher the max value is chosen, the less
# reflective the water will be directly at the shore line. The reflectiveness transitions
# linearly from max to min throughout the distance given by blend_distance from the shore.
# Allowed values are between 0 and 1, and alpha_min should be smaller than alpha_max or
# things may look weird.
# The following alpha_min values will not give you any dithering artifacts on all-water tiles,
# so the use of these is recommended. It is multiples of 16/239 (rounded up slighty)
# 0.0700, 0.1339, 0.2009, 0.2678, 0.3348, 0.4017, 0.4687
# 0.5356, 0.6026, 0.6695, 0.7365, 0.8034, 0.8703, 0.9373
alpha_min=0.2678
alpha_max=0.7

# The water color in hexadecimal RGB notation. Prefix with #. This should be blue
# or greenish blue or some shades of brown, depending on your preference.
# Values of #000000 are discouraged when using water blending - it will result
# in weird behavior at the shorelines.
water_rgb=#000D1A

# Try to smooth land/water boundaries by trying to match the water mask to the image content.
# This is a a somewhat experimental algorithm.
water_smoothing=Off

# The decision threshold for water/land when water_smoothing is enabled. 0 means everything
# will be turned to land, 1 means everything turns to water. Chose some value inbetween.
water_threshold=0.33

# Maximum number of bytes allocated to BMP graphics tiles in RAM at any time (0 for unlimited)
# The value below states 100 MB.
#cache_bytes_limit=100000000
cache_bytes_limit=1073741824

# Maximum number of BMP tiles to cache in RAM at any time (0 for no limit).
cache_tiles_limit=100000

# The currently active service is configured here. Only ONE active source please.
# The other source statements should be commented out.
#source=Acme Globe Service
#source=Service Example 1
source=Service Example 3
#source=Service Example 4

# The sources you want to be able to switch from the GUI menu.
# Separate the list entries with | and enclose in quotes. Make sure the
# names specified here are valid services which are defined below.
# You may want to rename the services according to your preference,
# but make sure you replace all occurences of the strings.
menu_sources="Service Example 1|Service Example 2|Service Example 3|Service Example 4"

# Experimental API Hooking section. Disable if you see strange crashes and effects.
# Currently we only have the DirectX 9 hook. More hooks are planned.
enable_hooking=No

# The DirectX 9 hook enables the moving map overlay. More features are planned.
enable_dx9hook=No

# A flag whether to show the moving map overlay initially or not.
enable_movingmap=No

# Dimensions and overlay colors of the moving map. Positions are percentages of the screen.
# Width and Height refer to the full 512x512 pixel texture used for the map. To get a round
# map circle, the ratio of width and height should match your screen's aspect ratio (e.g. 4:3)
# Radius is given in the map texture's pixels where one pixel represents a LOD 15 tile. A
# radius of 0 disables the round stencil and shows the entire 512x512 texture. Color is given
# in a hexadecimal ARGB notation.
movingmap_alpha=255
movingmap_color=#ff000000
movingmap_xpos=88
movingmap_ypos=15
movingmap_width=60
movingmap_height=80
movingmap_radius=60

#
# Here begin the service specific configurations
#

# This is new when you specify captcha_module
#
# On encountering HTTP 302 redirects the captcha module will send Internet Explorer's cookies
# stored for the specified service domain to the web server. It will also display whatever web
# page the service redirects you to. This could be a page requiring you to enter a so-called
# captcha. After entering the captcha correctly, the resulting session cookie will be stored as
# a permanent cookie (expiration 1 day) in your IE Cookies folder and sent to the service on
# subsequent requests. You will then be able to use the service as long as you wish, given that
# you correctly enter the captcha dialog which may nag you once every 20 minutes or so.
#
# Explaining the captcha_config arguments:
#
# cookiedomain from captcha_config specifies the domain name for which cookies are stored.
# This might be the service name plus a top level domain like ".com"
#
# cookieurl specifies a HTTP url from which an identifying cookie will be retrieved first, if
# no existing identifying cookie is found. This may be required sometimes to make the captcha
# dialog appear in the first place. This could be the service's front page URL (e.g. a search
# engine)

[Acme Globe Service]
cache_folder=C:\Program Files\Microsoft Games\cache.acme
network_module=libnettile
module_config="conn=20|rate=2.0|verbose=0|server=http://server*.acmeglobe.com|path=/terraintile?pos=%s&v=%v|quad=ABCD|balance=0123|agent=Mozilla/4.0 (compatible; The TileProxy Project)"
captcha_module=captchaform
captcha_config="cookiedomain=acmeglobe.com|cookieurl=http://www.acmeglobe.com"
min_level=9
max_level=17
map_version=1
color_hack=No
color_level=0
bulk_extend=25

[service Example 1]
cache_folder=C:\Program Files\Microsoft Games\cache.service1
network_module=libnettile
module_config="conn=20|rate=2.0|verbose=0|server=http://a*.ortho.tiles.virtualearth.net|path=/tiles/a%s.jpeg?g=%v|quad=0123|balance=0123|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"
min_level=5
max_level=17
map_version=213
level_mapping=5,6,7,8,9,10,11,12,15,15,15,16,17
#level_mapping=9,10,11,12,14,14,15,16,17,18,19 more radius HQ (13->14)
#level_mapping=9,10,11,14,14,14,15,16,17,18,19 even more radius in HQ (12,13->14)
color_hack=Yes
color_level=13
bulk_extend=50

[service Example 3]
cache_folder=C:\Program Files\Microsoft Games\cache.service3
network_module=libnettile
module_config="conn=20|rate=2.0|verbose=0|server=http://us.maps3.yimg.com|path=/aerial.maps.yimg.com/img?x=%x&y=%y&z=%z&v=%v&t=a|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"
min_level=5
max_level=17
level_mapping=5,6,7,8,9,10,11,12,15,15,15,16,17
#level_mapping=5,5,5,5,5,5,13,15,15,15,15,16,17
#level_mapping=5,6,7,8,9,10,12,15,15,15,15,16,17
map_version=1.8
color_hack=No
color_level=0
bulk_extend=50

[service Example 4]
cache_folder=C:\Program Files\Microsoft Games\cache.service4
network_module=libnettile
module_config="conn=20|rate=2.0|verbose=0|server=http://mapcache*.ask.com|path=/sat/%Z/%X/%Y?partner=|balance=1234|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"
min_level=5
max_level=17
map_version=1
color_hack=Yes
color_level=12
bulk_extend=50

JohnG3 · March 13, 2013

Pardon my connections: 10 Mbps

OK, that connection speed is not the problem then - that's a good thing. Your Proxyuser.ini file looks OK (for Service1). You might try using Service3 to see if you get any better resolution images. Your Proxyuser.ini Service3 data is incomplete. I posted mine for Service1 and Service3 below:

[service Example 1]

cache_folder=E:\Microsoft Games\cache.service1

network_module=libnettile

min_level=9

max_level=17

map_version=1135

level_mapping=9,10,11,14,14,14,15,16,17

color_hack=no

color_level=13

bulk_extend=50

[service Example 3]

cache_folder=E:\Microsoft Games\cache.service3

network_module=libnettile

module_config="conn=20|rate=2.0|verbose=0|server=http://us.maps3.yimg.com|path=/aerial.maps.yimg.com/img?x=%x&y=%y&z=%z&v=%v&t=a|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"

min_level=9

max_level=17

map_version=1.9

level_mapping=9,10,11,14,14,14,15,16,17

color_hack=No

color_level=0

bulk_extend=50

NOTE: I used word wrap so you can see the whole "module_config=..." line (shows as 2 lines above). Also you will have to change the "cache_folder= E:\"... to match your cache folders.

Another hint for selecting which service to use (i.e. Service1 or Service3) is to use the Flash Earth mapping tool: http://www.flashearth.com/

If you post your exact FSX latitude/longitude, I'll double-check on the tile resolution you can expect. It may just be that the area you are flying in has poor resolution with one or both mapping services.

Finally, I note that you are using levels 9-19. I find that anything over level 17 tiles don't even exist in any USA or Europe location I fly over, so there is no need to try to download level 18 or level 19 tiles. You can easily check this by using the TileProxy utility "Manage Service Caches" which was installed with TileProxy.

Good luck,

John

prilete · March 14, 2013

OK, that connection speed is not the problem then - that's a good thing. Your Proxyuser.ini file looks OK (for Service1). You might try using Service3 to see if you get any better resolution images. Your Proxyuser.ini Service3 data is incomplete. I posted mine for Service1 and Service3 below:

[service Example 1]

cache_folder=E:\Microsoft Games\cache.service1

network_module=libnettile

module_config="conn=20|rate=2.0|verbose=0|server=http://a*.ortho.tiles.virtualearth.net|path=/tiles/a%s.jpeg?g=%v|quad=0123|balance=0123|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"

min_level=9

max_level=17

map_version=1135

level_mapping=9,10,11,14,14,14,15,16,17

color_hack=no

color_level=13

bulk_extend=50

[service Example 3]

cache_folder=E:\Microsoft Games\cache.service3

network_module=libnettile

module_config="conn=20|rate=2.0|verbose=0|server=http://us.maps3.yimg.com|path=/aerial.maps.yimg.com/img?x=%x&y=%y&z=%z&v=%v&t=a|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"

min_level=9

max_level=17

map_version=1.9

level_mapping=9,10,11,14,14,14,15,16,17

color_hack=No

color_level=0

bulk_extend=50

NOTE: I used word wrap so you can see the whole "module_config=..." line (shows as 2 lines above). Also you will have to change the "cache_folder= E:\"... to match your cache folders.

Another hint for selecting which service to use (i.e. Service1 or Service3) is to use the Flash Earth mapping tool: http://www.flashearth.com/

If you post your exact FSX latitude/longitude, I'll double-check on the tile resolution you can expect. It may just be that the area you are flying in has poor resolution with one or both mapping services.

Finally, I note that you are using levels 9-19. I find that anything over level 17 tiles don't even exist in any USA or Europe location I fly over, so there is no need to try to download level 18 or level 19 tiles. You can easily check this by using the TileProxy utility "Manage Service Caches" which was installed with TileProxy.

Good luck,

John

Muchas gracias, no te lo entendido Lo Que dices yo.

Si haces el favor hazme El Cambio En El servivio 1 y el 3 Que Te Escribo aqu?.

[servicio del Ejemplo 1]

cache_folder = E: \ Tileproxy \ cache \ cache.service1

network_module = libnettile

(Compatible; MSIE 7.0; Windows NT 6.0; SLCC1;. NET CLR 2.0.50727;. NET CLR 3.0.04506;. NET CLR 1.1.4322) "

min_level = 9

max_level = 19

map_version = 1180

level_mapping = 9,10,11,12,13,14,15,16,17,18,19

# Level_mapping 9,10,11,12,14,14,15,16,17,18,19 = m s de radio HQ (13 -> 14)?

? # Level_mapping = 9,10,11,14,14,14,15,16,17,18,19 radio nm s en HQ (12,13 -> 14)

color_hack = S?

color_level = 13

bulk_extend = 50

[servicio del Ejemplo 3]

cache_folder = E: \ Tileproxy \ cache \ cache.service3

network_module = libnettile

(Compatible; MSIE 7.0; Windows NT 6.0; SLCC1;. NET CLR 2.0.50727;. NET CLR 3.0.04506;. NET CLR 1.1.4322) "

min_level = 5

max_level = 19

map_version = 1,8

color_hack = No se

color_level = 0

bulk_extend = 50

Muchas gracias

Prilete

JohnG3 · March 19, 2013

Muchas gracias, no te lo entendido Lo Que dices yo.
Si haces el favor hazme El Cambio En El servivio 1 y el 3 Que Te Escribo aqu?.

English translation: (I don't speak Spanish - sorry)

"Thank you very much, what you do not understand what I say.
If you please do me the change in the 1 and 3 servivio I write here?."

Here are the changes I would recommend:

I would have left the English text in your ProxyUser.ini file because most people will give you information based on the English version.

Just check that you have also changed the following lines (approximately at line 130) in your Proxyuser.ini file:

# The currently active service is configured here. Only ONE active source please.
# The other source statements should be commented out.
#source=Service Example 0
source=Servicio del Ejemplo 1
#source=Servicio del Ejemplo 3

Here are the changes I would suggest for your "Service1" (you renamed it "Servicio del Ejemplo 1"):

[servicio del Ejemplo 1]
cache_folder = E: \ Tileproxy \ cache \ cache.service1
network_module = libnettile
module_config="conn=20|rate=2.0|verbose=0|server=http://a*.ortho.tiles.virtualearth.net|path=/tiles/a%s.jpeg?g=%v|quad=0123|balance=0123|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"
min_level=9
max_level=17
map_version = 1180

level_mapping=9,10,11,14,14,14,15,16,17
## your original >>> level_mapping = 9,10,11,12,13,14,15,16,17,18,19
# Level_mapping 9,10,11,12,14,14,15,16,17,18,19 = m s de radio HQ (13 -> 14)?
# Level_mapping = 9,10,11,14,14,14,15,16,17,18,19 radio nm s en HQ (12,13 -> 14)
color_hack=no
color_level = 13
bulk_extend = 50

Here are the changes I would suggest for your "Service3" (you renamed it "Servicio del Ejemplo 3"):

[servicio del Ejemplo 3]
cache_folder = E: \ Tileproxy \ cache \ cache.service3
network_module = libnettile

module_config="conn=20|rate=2.0|verbose=0|server=http://us.maps3.yimg.com|path=/aerial.maps.yimg.com/img?x=%x&y=%y&z=%z&v=%v&t=a|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"
min_level=9
max_level=17
map_version=1.9

level_mapping=9,10,11,14,14,14,15,16,17
color_hack=No
color_level=0
bulk_extend=50

Note: level_mapping above 17 generally produces no TileProxy tiles in the cache folders. There are no images available for Service1 or Service3 at levels 18 and 19. This can best be checked using the TileProxy utility program "Manage Service Caches" Go to the Start button and then the TileProxy folder to find this utility. It was installed with TileProxy.

I also looked at another post you did and, if you are flying FSX/Tileproxy near Marbella, Spain, I believe Service1 is much better than Service3 - so I would not even use Service3 (Servicio del Ejemplo 3). Just leave Servicio del Ejemplo 1 as the active service as shown above.

I checked this with http://www.flashearth.com/

http://forum.avsim.net/topic/400496-tile-proxy-spain/#entry2603352

Good luck and have fun with FSX/TileProxy...

GHD · March 19, 2013

Bing V838 has Marbella at 0.25m/Pixel.

prilete · March 19, 2013

English translation: (I don't speak Spanish - sorry)

"Thank you very much, what you do not understand what I say.

If you please do me the change in the 1 and 3 servivio I write here?."

Here are the changes I would recommend:

I would have left the English text in your ProxyUser.ini file because most people will give you information based on the English version.

Just check that you have also changed the following lines (approximately at line 130) in your Proxyuser.ini file:

# The currently active service is configured here. Only ONE active source please.

# The other source statements should be commented out.

#source=Service Example 0

source=Servicio del Ejemplo 1

#source=Servicio del Ejemplo 3

Here are the changes I would suggest for your "Service1" (you renamed it "Servicio del Ejemplo 1"):

[servicio del Ejemplo 1]

cache_folder = E: \ Tileproxy \ cache \ cache.service1

network_module = libnettile

module_config="conn=20|rate=2.0|verbose=0|server=http://a*.ortho.tiles.virtualearth.net|path=/tiles/a%s.jpeg?g=%v|quad=0123|balance=0123|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"

min_level=9

max_level=17

map_version = 1180

level_mapping=9,10,11,14,14,14,15,16,17

## your original >>> level_mapping = 9,10,11,12,13,14,15,16,17,18,19

# Level_mapping 9,10,11,12,14,14,15,16,17,18,19 = m s de radio HQ (13 -> 14)?

# Level_mapping = 9,10,11,14,14,14,15,16,17,18,19 radio nm s en HQ (12,13 -> 14)

color_hack=no

color_level = 13

bulk_extend = 50

Here are the changes I would suggest for your "Service3" (you renamed it "Servicio del Ejemplo 3"):

[servicio del Ejemplo 3]

cache_folder = E: \ Tileproxy \ cache \ cache.service3

network_module = libnettile

module_config="conn=20|rate=2.0|verbose=0|server=http://us.maps3.yimg.com|path=/aerial.maps.yimg.com/img?x=%x&y=%y&z=%z&v=%v&t=a|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"

min_level=9

max_level=17

map_version=1.9

level_mapping=9,10,11,14,14,14,15,16,17

color_hack=No

color_level=0

bulk_extend=50

Note: level_mapping above 17 generally produces no TileProxy tiles in the cache folders. There are no images available for Service1 or Service3 at levels 18 and 19. This can best be checked using the TileProxy utility program "Manage Service Caches" Go to the Start button and then the TileProxy folder to find this utility. It was installed with TileProxy.

I also looked at another post you did and, if you are flying FSX/Tileproxy near Marbella, Spain, I believe Service1 is much better than Service3 - so I would not even use Service3 (Servicio del Ejemplo 3). Just leave Servicio del Ejemplo 1 as the active service as shown above.

I checked this with http://www.flashearth.com/

http://forum.avsim.net/topic/400496-tile-proxy-spain/#entry2603352

Good luck and have fun with FSX/TileProxy...

Thank you very much for the reply

I'm surprised the photos of Marbella, for I

live here.

Angel

Saludos

JohnG3 · March 22, 2013

Here are the changes I would suggest for your "Service1" (you renamed it "Servicio del Ejemplo 1"):

NOTE: after posting my changes to Service1 and Service3 previously, I noticed that the forum editor changed the data in the "module_config=" line containing the "http;//". I have re-posted that data with a work-around. Simply replace the "xttp" with an "http" in the module_config lines. (see below):

[servicio del Ejemplo 1]
cache_folder = E:\Tileproxy\cache\cache.service1
network_module=libnettile

## -----------------> Please change the line below from "xttp://" to "http://" after cut and paste into your ProxyUser.ini file

min_level=9
max_level=17
map_version=1135
level_mapping=9,10,11,14,14,14,15,16,17
color_hack=no
color_level=13
bulk_extend=50

[servicio del Ejemplo 3]
cache_folder = E:\Tileproxy\cache\cache.service3
network_module=libnettile

## -----------------> Please change the line below from "xttp://" to "http://" after cut and paste into your ProxyUser.ini file
module_config="conn=20|rate=2.0|verbose=0|server=xttp://us.maps3.yimg.com|path=/aerial.maps.yimg.com/img?x=%x&y=%y&z=%z&v=%v&t=a|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"
min_level=9
max_level=17
map_version=1.9
level_mapping=9,10,11,14,14,14,15,16,17
color_hack=No
color_level=0
bulk_extend=50

Sorry for the extra work. Hope this works OK for you...

John G.

Sign In

Help to improve my Tileproxy

Recommended Posts

prilete 0

Share this post

Link to post

Share on other sites

01generation60 8

Share this post

Link to post

Share on other sites

JohnG3 1

Share this post

Link to post

Share on other sites

prilete 0

Share this post

Link to post

Share on other sites

John_Cillis 2,406

Share this post

Link to post

Share on other sites

JohnG3 1

Share this post

Link to post

Share on other sites

prilete 0

Share this post

Link to post

Share on other sites

JohnG3 1

Share this post

Link to post

Share on other sites

GHD 21

Share this post

Link to post

Share on other sites

prilete 0

Share this post

Link to post

Share on other sites

JohnG3 1

Share this post

Link to post

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

AVSIM Library

Contact Us

Rules & Policies

Etc.

AVSIM History