double commands VRinsight CDU II problem

[crazysticks 0]

When I try to put in a flightplan, the CDU does not accept double commands.

 

For example, I'll try to put in ICAO EHGG, the second G won't do.

when i try to put in 330 ft the second 3 won't do.

 

So everytime I need to hit the same button 'twice' the CDU does not accept the second command

from the same button.

 

i have tried to reinstall the drivers, without succes....

 

?????

[Andydigital 93]

Leave a longer gap between button presses and it should work. Previously people were complaining that the panels were sometimes double pressing by mistake, so I presume VRinsight added a facility to stop the double entry of characters. If you want to speed the rate up a little, open the CDU2.ini file that is inside the VRinsight bin folder and change the update time = entry to a lower number, try 10 instead. You will need to adjust this in the specific section of the CDU2.ini that relates to the aircraft you are having a problem with.

[crazysticks 0]

Thanks for your reply Andydigital,

 

I tried to push the buttons all differend ways, but unfortunately it's not the solution for my problem.

 

I posted my problem on several forums, no one seems to be familiar with this problem.

I've send a mail to VRinsight tech.support, they are not responding or what so ever.

 

So I have this wondefull looking CDU and my fingers itch to program the CDU and fly :O

 

Hopefully it's just a matter of (short)time, and there will be someone who can help me out here.

 

Thanks again Andydigital!!

[Andydigital 93]

Did you try my previous suggestion of editing the CDU2.ini file in the folder below;

 

C:\Program Files (x86)\VRInsight\bin

 

All you need to do is change a number from say 100 to 10 and try again.

 

i.e. change the number show below in red from 100 to 10.

 

[Aircraft31]    // PMDG 777X
ModuleEx =
Module  = ../CDU-II/SFP2_CDU2_KeyCmd.dll
KeyMap1 = ../CDU-II/KeyMap/SFP2_CDU2_PMDG_777X.dat
KeyMap2 =

Win_Name = VRinsight CDU-II
Win_X =-770
Win_Y =1211
Win_W =772
Win_H =683
Win_UX = 20
Win_UY = 40

Win_Name_Ex =
Win_X_Ex =
Win_Y_Ex =
Win_W_Ex =
Win_H_Ex =
Win_UX_Ex =
Win_UY_Ex =

KBD_Enable= false

SleepTime = 0
UpdateTime = 100

Install_0.TYPE = edit
Install_0.SRC_PATH = ../CDU-II/Aircraft/PMDG_B777X/FSX/panel
Install_0.DST_PATH = /SimObjects/Airplanes/PMDG 777-200LR/panel
Install_0.CFG_FILE = panel.cfg

[crazysticks 0]

Thanks a lot Andydigital!!

 

Editing the .ini file solved the CDU problem.

 

Default setting was "updatetime= -1", changed it to 5 and works fine.

 

Thanks again!!

[Andydigital 93]

Good news thanks for the update.