FSX-MS FSBuild 2.4 and the International Date Line

[leemarks 0]

Hello All!

 

I'm running into a problem.  I'm trying to set a flightplan from LAX to HND using FSBuild 2.4.  FSBuild will build the flightplan and show that it has indeed exported it, just like normal.  Once I'm into the flightsim and go to load the flight, the flight shows up on the list, but upon selecting it, it proceeds to load nothing, and if you look at the "edit" tab it simply shows the airport that was selected from the main screen.  I have seen this within both FSX and FS2004, but only with flights that will cross the International Date Line.  Every other flight that I set up using FSBuild comes up without a hitch.

 

From whichever sim I am using I can generate a plan from within the built-in planner of the sim, but there seems to be some sort of breakdown between FSBuild and the sim in regards to plans crossing the Date Line.  As I said before, every other plan created by FSBuild comes off perfectly - so long as I'm not trying to cross the Pacific.  Anyone have any ideas?

 

Thanks,

Lee Marks

Spokane, WA

[spesimen 135]

never had any problems with the dateline and fsbuild before. i don't think those flight plans store any time or date information anyway, they are just a list of coordinates and names of waypoints.

 

one suggestion is to check that you have a recent version... i think current is at least 2.4.0.31

 

maybe try rebuilding your data under options->navdata  .... 

 

maybe post the flight plan you tried to use... i tried just now klax-rjtt and the auto-generated path was: AVE J6 ROBIE J88 PYE 40N28 43N33 45N40 46N46 47N53 48N60 49N68 48N76 48E76 CARTO G344 KALNA 37E43 STONE

seemed to load up no problem!  

sorry i don't have more ideas, good luck! you might get better answers on the forums at the fsbuild site

 

cheers

-andy crosby

[Geddy_2112 8]

No problems here either, real world routing KLAX VTU5 RZS LIBBO BRINY BOARS AMAKR LINUZ NATTE ZANNG 5000N14000W 5300N15000W 5400N16000W 5400N17000W 5400N18000W OPAKE R580 OMOTO R580 ONEMU R580 OATIS OTR3 GOC Y10 STONE RJTT exported and loaded no problems 

 

Are you sure you're exporting it to the fight format?

What aircraft are you loading it into?