FS9 767 Panel by Alessandro Antonini

[Carob 2]

Hello.

 

I'm hoping someone can help with an issue I'm having with the 767 panel by Alessandro Antonini for FS9 (cpb767p11.zip).

 

In his notes he says to make sure the Radio section of the aircraft.cfg file looks like...

[Radios]

Audio.1=1

Com.1=1,1

Com.2=1,1

Nav.1=1,0,1

Nav.2=1,0,0

Adf.1=1

Transponder.1=1

Marker.1=1

 

which I did.  However, the only way I'm able to change com1 is using the FS9 ATC window.  I can't manually adjust it.

 

I'm pretty sure there's a way to fix this but I don't know what it is.

 

Can anyone help?

 

Thanks!

[tgibson 11]

Are your changing the standby frequency and then clicking the swap button?

[N60JBravo 27]

His instructions have an error.

 

The [Radios] section should be...

 

 

[Radios]

Audio.1=1

Com.1=1,0

Com.2=1,0

Nav.1=1,0,1

Nav.2=1,0,0

Adf.1=1

Transponder.1=1

Marker.1=1

 

regards,

Joe

[n4gix 4,947]

It's an oddity of FS9/FSX/P3D that there is only one set of 'control commands' for tuning COM and NAV radios.

 

If your radios have a 'standby' channel, then the 'control commands' will only tune the standby frequencies.

 

If your radios have only the 'active' channel, then the 'control commands' will tune the active frequencies.

 

Frankly it is a massive PITA for gauge programmers...

[Carob 2]

tgibson...  There is no standby freq on this particular panel.

 

N60JBravo...  I may have found a different panel to play with, but, I will check that out.  Thanks.