Linda 2.6.0 crash :/

[Pmans 0]

Hi guys

 

I tried installing linda 2.6.0 yesturday and i followed the instructions but when i open linda, it freezes and crashes :/ what do i do?

 

Pmans

[ScotFlieger 280]

Hi Pmans

 

Sorry to hear that you are experiencing problems and thank you for the extra details.  However, I do need more information. 

 

What version of Windows are you using and which simulator (FSX, FSX-SE or P3D)?  Have you installed LINDA before?  What devices do you have attached (ie. joysticks)?  How long did you wait before determining that LINDA 2.6.0 had crashed.  There is a note to say that for some users with Win 8.1 that LINDA can take 60-90 secs to start. And before you ask, I do not yet know the reason.

 

If your problem persists, I would ask you to try LINDA 2.5.7 which is downloadable from the bottom of the 2.6.0 post.

[Pmans 0]

Hi Scott

 

I am using windows 7 64bit and FSX yes i have installed linda (V.1.13) Saitek pro flight yoke, 2 throttles, switch panel and multi panel when i go in the program it shows only some of the program and just freezes after :/ 

 

Pmans

[IFR7700 228]

I had the same problem.  Every time I loaded FSX after installing LINDA 2.6.0, FSX crashed immediately after loading.  I removed 2.6.0 and re-installed 2.5.7.  I ran 2.5.7 to make sure everything worked properly, which it did.  On a whim, I re-installed 2.6.0 and LINDA is working perfectly.  I currently am using 2.6.0 with no problems.  I don't know what I did to fix my 2.6.0 problem, but I'm glad I did.  You might try following the same steps I did.

 

Well, never mind.  2.6.0 has started crashing FSX again.  I have reverted to 2.5.7 and everything is ok.

 

CH  Eclipse Yoke

CH Throttle Quad

Saitek Multi-Panel

Saitek Switch Panel

Saitek Radio Panel

Win 7 64-bit  Intel 4790K @ 4.4 GHz

ASUS Z97 Deluxe MB

Edited March 7, 2015 by IFR7700

[dgraham1284 92]

Same

[ScotFlieger 280]

 

 

I ran 2.5.7 to make sure everything worked properly, which it did. On a whim, I re-installed 2.6.0 and LINDA is working perfectly. I currently am using 2.6.0 with no problems. I don't know what I did to fix my 2.6.0 problem, but I'm glad I did.  .....

 

2.6.0 has started crashing FSX again.

 

Thank you for the reports. It is a shame these weren't found during the beta testing!  I am now constrained on my available time due to 'real world' work and life.  None of these issues show up on my 2 systems under FSX, FSX-SE or P3D.

 

Dennis, when you say LINDA is crashing FSX, is this shown in the crash report?  Can you send me the linda2.log at linda@awginfosys.net.  As I have been unable to Saitek code myself, could I ask you to disconnect the Radio and Multi Panels and retest 2.6.0?

 

All users

 

There is obviously an underlying issue for some users which I would like to investigate subject to my available time.  Telling me that it 'crashed' or 'same' is not very helpful.  I need more information as Dennis supplied.  Your Windows version, LINDA version, equipment used, error log (linda2.log and cut-and-paste of console) and what happens or is seen when the 'crash' occurs.  Screen shots are useful.

[IFR7700 228]

Latest AppCrashView report:

 

All panels installed

 

Version=1
EventType=APPCRASH
EventTime=130702147691150554
ReportType=2
Consent=1
UploadTime=130702147692240616
ReportIdentifier=6a2cd839-c4dc-11e4-90fe-54271efbb1c5
WOW64=1
Response.BucketId=3883806133
Response.BucketTable=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=fsx.exe
Sig[1].Name=Application Version
Sig[1].Value=10.0.61637.0
Sig[2].Name=Application Timestamp
Sig[2].Value=46fadb14
Sig[3].Name=Fault Module Name
Sig[3].Value=ntdll.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=6.1.7601.18247
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=521ea8e7
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=00038e19
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.768.3
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
UI[2]=Z:\FSX Gold\fsx.exe
UI[3]=Microsoft Flight Simulator® has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=Z:\FSX Gold\fsx.exe

 

...  edited for space

FriendlyEventName=APPCRASH
ConsentKey=APPCRASH
AppName=Microsoft Flight Simulator®
AppPath=Z:\FSX Gold\fsx.exe
ReportDescription=Stopped working
 

 

P.S.  It occurs to me that I am using SPAD when I load LINDA.  Could that be a conflict?

Edited March 7, 2015 by ScotFlieger
Edited for space

[ScotFlieger 280]

Hi IFR7700

 

Thank you for the crash log. In future please email to linda@awginfosys.net. Yes, this version of LINDA 2.6.0 replaces SPAD.

[FSC190 30]

Hi Andrew,

don't worry about those issues.

It seems, no one of those users where Beta-testers. I only count 5 guys replying in the beta test, not very much for a complete test.

[dgraham1284 92]

 

 

There is obviously an underlying issue for some users which I would like to investigate subject to my available time.  Telling me that it 'crashed' or 'same' is not very helpful.  I need more information as Dennis supplied.  Your Windows version, LINDA version, equipment used, error log (linda2.log and cut-and-paste of console) and what happens or is seen when the 'crash' occurs.  Screen shots are useful.

 

 

Init LINDA 2.5.7 ...

Can start...

Creating forms...

Font added

Sys Config loaded

VRI config loaded

HID Definitions loaded

HID config loaded

Selector initialized

Dev configs loaded

News read

--> Main form: done!

--> Viewer form: done!

--> Input form: done!

--> FSX controls form: done!

--> Console form: done!

--> Macros form: done!

--> Module form: done!

--> Editor form: done!

New HID Device attached

New HID Device attached

New HID Device attached

New HID Device attached

New HID Device attached

New HID Device attached

New HID Device attached

New HID Device attached

 

 

While that is not the log from 2.6 it did look the same, only with:

 

 

HID Unplug detected

HID Unplug detected

HID Unplug detected

HID Unplug detected

HID Unplug detected

HID Unplug detected

HID Device changed

 

At the end. Appcrash view provided that same as IFR7700.  

 

windows 8.1

Saitek multi, radio and switch panel.

Combat rudder pedals

Pro flight yoke. 

Additional throttle quadrant. 

[ScotFlieger 280]

Hi David

 

Is this crash happening in mid flight or when you close FSX? I ask because the HID unplug detected actions happens when LINDA Is shutting down correctly.

[twincessna340a 8]

Init LINDA 2.6.0 ...

Can start...

Creating forms...

LINDA Ver 2.6.0 (130) GUI starting...

Fonts added

Sys Config loaded

VRI config loaded

HID Devices loaded

HID Definitions loaded

HID config loaded

Selector initialized

News read

Main Timer started

--> Main form: done!

--> Viewer form: done!

--> Input form: done!

--> FSX controls form: done!

--> Console form: done!

--> Macros form: done!

--> Module form: done!

--> Editor form: done!

HID OnArrival 27B4F30

HID OnArrival 27B50B0

HID OnArrival 27B5230

HID OnArrival 27B53B0

HID OnArrival 27B52F0

HID OnArrival 27B5470

HID OnArrival 27B5530

HID OnArrival 27B56B0

HID OnArrival 27B5770

HID OnArrival 27B5830

HID OnArrival 27B58F0

HID OnArrival 27B5A70

HID OnArrival 27B5BF0

HID OnDeviceChange 

HID IsJoystick test = 27B4F30=046D/C215 = Joystick

 

Linda 2.6 stops responding almost immediately (blank space).

Win 7 x64 FSX

Logitech 3D pro, 2 Saitek throttles

 

Happens with and without devices plugged in.

Happens with and without running as administrator.

[ScotFlieger 280]

Linda 2.6 stops responding almost immediately (blank space).

 

Hi Ike

 

Thank you for the report. Is the blank just the LINDA window and how long did you leave it before closing/intervening?  There are reports that it can stop responding for 60-90 secs.

 

Can you confirm your logitech joystick has the vid 046D/ pid C215?

Edited March 7, 2015 by ScotFlieger
logitech question

[dgraham1284 92]

Hi David

 

Is this crash happening in mid flight or when you close FSX? I ask because the HID unplug detected actions happens when LINDA Is shutting down correctly.

 

It happens as soon as I load the flight. FSX-SE and Prepar3d V2.5. For example The PMDG Setup process (the initial count down) gets to perhaps 12. I am using the latest registered FSUIPC as well. 4.939e.

[ralhue 1]

same here:

 

Windows 8.1

P3D v2.5 12943

Linda 2.6.0

FSUIPC 4.393e

 

Thrustmaster Warthog

MFG Crosswind Rudders

5 Bodnars

1 Arcaze

 

P3D crash 10 sec after starting