ggi

Further to this - I was running DX12 (Beta) mode in MSFS. This could have been the problem? No longer have access to the 337 so cannot test.

Okay - no worries. Refund requested.

Purchased today, but unable to run on MSFS. It downloaded from the marketplace okay, and I can select the aircraft in the create flight screens, the pre-load pictures show the aircraft at the airfield, but on opening it's a CTD. Re install tried - but so far I cannot operate this in game. Is this a marketplace issue? Any ideas I would be grateful for. Many thanks, Gary

Finally fixed.... 🤪 I was missing the database from C:\Users\my_name\AppData\Local\Temp\Temp1_GarminTrainerSetup_2400.zip\setup_resources\databases\2.4.0.0 I downloaded this from the RXP (Garmin Trainer 2400) resource and it's up an running now. I'm not certain this is the latest version, but I have a working GTN so I'm happy. That only took 3 days..... Gary

One step forward - Trainer has now returned following a registry clean and reinstall - but database is still missing from GTN750 and 650. 21/01/03 10:57:46.439 03252 - ] # rxpGtnSim64.dll version 2.5.27.0 21/01/03 10:57:46.439 03252 INFO ] 21/01/03 10:57:47.471 04888 INFO ] GTN 750.1 - TRAINER 6623 21/01/03 10:57:47.475 04888 WARN ] GTN 750.1 process is running as-admin 21/01/03 10:57:47.732 04888 INFO ] GTN 650.2 - TRAINER 6623 21/01/03 10:57:47.737 04888 WARN ] GTN 650.2 process is running as-admin 21/01/03 10:58:44.397 04888 INFO ] GTN 650.2 - TRAINER 6623 21/01/03 10:58:44.401 04888 WARN ] GTN 650.2 process is running as-admin 21/01/03 11:00:03.160 04888 INFO ] FPLN not found in: C:\Program Files (x86)\Garmin\Trainers\Packages\GTN\Bin\ Gary

Hi Bert , thank you for your assistance - I'm installing the 2.5.27.2 update and still have blank screens with my P3Dv5.1 setup. --------------- 21/01/03 08:48:49.993 12356 - ] # rxpGTN.dll version 2.5.27.2 21/01/03 08:48:49.993 12356 INFO ] --------------- 21/01/02 16:20:56.607 06196 - ] # rxpGTN_menu.dll version 2.5.27.0 21/01/02 16:20:56.619 06196 INFO ] edit panel: C:\Users\gary\Documents\Prepar3D v5 Add-ons\A2A\SimObjects\Airplanes\A2A_C172\panel\panel.cfg 21/01/02 16:22:06.184 08564 INFO ] 21/01/02 16:22:06.195 08564 INFO ] edit panel: C:\Users\gary\Documents\Prepar3D v5 Add-ons\A2A\SimObjects\Airplanes\A2A_C172\panel\panel.cfg --------------- 21/01/03 08:48:52.324 12356 - ] # rxpGtnSim64.dll version 2.5.27.0 21/01/03 08:48:52.324 12356 INFO ] 21/01/03 08:48:53.410 12356 ERROR] trainer not found or not supported 21/01/03 08:48:53.412 12356 INFO ] installed: 21/01/03 08:48:53.413 12356 INFO ] 6624 bin: C:\Program Files (x86)\Garmin\Trainers\ 21/01/03 08:48:53.414 12356 INFO ] 6624 dat: C:\ProgramData\Garmin\Trainers\ 21/01/03 08:48:53.465 12356 ERROR] trainer not found or not supported 21/01/03 08:48:53.466 12356 INFO ] installed: 21/01/03 08:48:53.467 12356 INFO ] 6624 bin: C:\Program Files (x86)\Garmin\Trainers\ 21/01/03 08:48:53.468 12356 INFO ] 6624 dat: C:\ProgramData\Garmin\Trainers\ Thanks for replying, New Year is not the best time to need support, so thanks again! Gary

The error file lists 21/01/02 20:21:14.167 04992 - ] # rxpGtnSim64.dll version 2.5.27.0 21/01/02 20:21:14.167 04992 INFO ] 21/01/02 20:21:15.220 04992 ERROR] trainer not found or not supported 21/01/02 20:21:15.233 04992 INFO ] installed: 21/01/02 20:21:15.234 04992 INFO ] 6624 bin: C:\Program Files (x86)\Garmin\Trainers\ 21/01/02 20:21:15.235 04992 INFO ] 6624 dat: C:\ProgramData\Garmin\Trainers\ 21/01/02 20:21:15.286 04992 ERROR] trainer not found or not supported 21/01/02 20:21:15.287 04992 INFO ] installed: 21/01/02 20:21:15.288 04992 INFO ] 6624 bin: C:\Program Files (x86)\Garmin\Trainers\ 21/01/02 20:21:15.289 04992 INFO ] 6624 dat: C:\ProgramData\Garmin\Trainers\ The trainer is in place, it's the latest version and it's in the location listed. It runs outside the sim perfectly - but still I have blank screens. Is there an issue using the only trainer Garmin allow you to download? Thanks for any solutions/ideas. Gary

Hi Frank - thanks for posting. I removed the GTNs and the Garmin Trainer. Restarted the PC, installed the RXP 750 + 650 and installed the Garmin Trainer 2710. Unfortunately I've still got blank screens. Thanks for the suggestion though - The A2A Cessna I'm using has the avionics switched on and I've set the GTN settings to Power Always On, so I can rule that out. The installers are the latest available. Cheers, Gary

After many frustrating hours and several reinstalls I now have blank screens on both the GTN 750 and 650, so the problem now worse than before. Gauge log 21/01/02 15:41:51.978 09272 - ] # rxpGTN.dll version 2.5.27.2 21/01/02 15:41:51.978 09272 INFO ] Menu 21/01/02 15:36:31.682 11788 - ] # rxpGTN_menu.dll version 2.5.27.0 21/01/02 15:36:31.694 11788 INFO ] edit panel: C:\Users\gary\Documents\Prepar3D v5 Add-ons\A2A\SimObjects\Airplanes\A2A_C172\panel\panel.cfg GTN SIM 21/01/02 15:41:54.470 09272 - ] # rxpGtnSim64.dll version 2.5.27.0 21/01/02 15:41:54.469 09272 INFO ] 21/01/02 15:41:55.422 09272 ERROR] trainer not found or not supported 21/01/02 15:41:55.435 09272 INFO ] installed: 21/01/02 15:41:55.436 09272 INFO ] 6624 bin: C:\Program Files (x86)\Garmin\Trainers\ 21/01/02 15:41:55.437 09272 INFO ] 6624 dat: C:\ProgramData\Garmin\Trainers\ 21/01/02 15:41:55.439 09272 INFO ] 6624 nav: C:\ProgramData\Garmin\Trainers\Databases\ 21/01/02 15:41:55.440 09272 INFO ] 6623 nav: C:\ProgramData\Garmin\Trainers\Databases\ 21/01/02 15:41:55.441 09272 INFO ] 6620 nav: C:\ProgramData\Garmin\Trainers\Databases\ 21/01/02 15:41:55.491 09272 ERROR] trainer not found or not supported 21/01/02 15:41:55.492 09272 INFO ] installed: 21/01/02 15:41:55.493 09272 INFO ] 6624 bin: C:\Program Files (x86)\Garmin\Trainers\ 21/01/02 15:41:55.494 09272 INFO ] 6624 dat: C:\ProgramData\Garmin\Trainers\ 21/01/02 15:41:55.496 09272 INFO ] 6624 nav: C:\ProgramData\Garmin\Trainers\Databases\ 21/01/02 15:41:55.497 09272 INFO ] 6623 nav: C:\ProgramData\Garmin\Trainers\Databases\ 21/01/02 15:41:55.498 09272 INFO ] 6620 nav: C:\ProgramData\Garmin\Trainers\Databases\ Garmin only allow the 2710 setup to run - uninstalling it and selecting the downloads GTNsetup.msi it states a newer version is installed and will terminate. If anyone can point me to a trainer that will run I would be grateful. Getting to the end of my tether with this.... Help please!!!! Thanks, Gary

Hello, I've got the missing database issue following a reinstall of P3Dv5.1 (5.1.12.26829). Other functions of my GTN 750/650 are working. GTN displays SW Version 6.62.4 TRNG and RXP 2.5.27.2. Windows 10 Home Build 19041.685 The log files show: 21/01/02 08:26:08.405 07732 - ] # rxpGTN.dll version 2.5.27.2 21/01/02 08:26:08.405 07732 INFO ] and 21/01/02 08:26:10.918 07732 - ] # rxpGtnSim64.dll version 2.5.27.0 21/01/02 08:26:10.917 07732 INFO ] 21/01/02 08:26:13.451 12540 INFO ] GTN 750.1 - TRAINER 6624 21/01/02 08:26:13.489 12540 WARN ] GTN 750.1 process is running as-admin 21/01/02 08:26:14.112 12540 INFO ] GTN 650.2 - TRAINER 6624 21/01/02 08:26:14.117 12540 WARN ] GTN 650.2 process is running as-admin 21/01/02 08:29:22.740 12540 INFO ] GTN 650.2 - TRAINER 6624 21/01/02 08:29:22.744 12540 WARN ] GTN 650.2 process is running as-admin 21/01/02 08:29:27.685 12540 INFO ] GTN 750.1 - TRAINER 6624 21/01/02 08:29:27.689 12540 WARN ] GTN 750.1 process is running as-admin 21/01/02 08:30:13.869 12540 INFO ] FPLN not found in: D:\Program Files (x86)\Garmin\Trainers\Packages\GTN\Bin\ Thank you in advance for any help! Gary

Same issues here - Carenado products are installed into v5 SimObjects with Unblock and Administrator rights selected. Some users report turning Water reflections off solves it, but I have no sucess with that. Will wait for a v5 installer.

Using P3Dv5 and FSUIPC 6.0.8 the Linda install 3.2.3a will not keep 'Start GUI with sim' option. I can start and run in sim and everything else works.

Thank you, that makes sense - I'm new to LINDA, and really enjoying the experience.

Stupid question time.... I've noticed there are several commands which use the 'show' instruction. For instance on the A2A Spitfire you can assign 'SPIT Primestate show'. When I assign this command to a button I don't see where the primer state actually shows on screen? Thanks for the help in advance!

Looks like a TACPAC conflict - early indications appear to show errors resolved following non-start of TACPAC module at sim start.