riccardo74

Save and reload a flight it's a must have in high-end aircraft like this, it's unthinkable that it hasn't one. Do you know if Fenix plan this feature in the next V2 update?

Does anyone know if you can save more than 10 cameras in VC? The choose is between 0 and 9, no more choice beyond or am I missing something?

Thanks so much Stephen, the difference is not so bad. Most of the time I spent with regional flights, so wx2pfpx.

Stephen thanks so much for your kind help (I've read your thread on Aerosoft foroum about this alert). Now I'm trying wx2pfpx and despite the red alert message I got on PFPX, seems it can download winds aloft data. This one is from my last flight LIPZ-LIRF: AWY WAYPOINT MT ALT WND/VEL TAS REM FUEL REM / USED LEG ACC NAME TMP FREQ GS DIST POSITION ETO / ATO -------------------------------------------------------------------------------- LIPZ/22R 7 3.4 / 0.1 -LIMM TESSERA 229 N4530.8 E01221.6 ...../..... CHI8D PZ461 218*CLB 085/002 6 3.1 / 0.3 :02 00:02 223 N4526.7 E01216.3 ...../..... CHI8D PZ464 175*CLB 101/009 15 2.8 / 0.6 :03 00:05 208 N4511.5 E01216.8 ...../..... CHI8D CHI 176*CLB 106/012 7 2.7 / 0.7 :01 00:06 CHIOGGIA 114.10 201 N4504.3 E01216.9 ...../.....AWY WAYPOINT MT ALT WND/VEL TAS REM FUEL REM / USED LEG ACC NAME TMP FREQ GS DIST POSITION ETO / ATO -------------------------------------------------------------------------------- LIPZ/22R 7 3.4 / 0.1 -LIMM TESSERA 229 N4530.8 E01221.6 ...../..... CHI8D PZ461 218*CLB 085/002 6 3.1 / 0.3 :02 00:02 223 N4526.7 E01216.3 ...../..... CHI8D PZ464 175*CLB 101/009 15 2.8 / 0.6 :03 00:05 208 N4511.5 E01216.8 ...../..... CHI8D CHI 176*CLB 106/012 7 2.7 / 0.7 :01 00:06 CHIOGGIA 114.10 201 N4504.3 E01216.9 ...../..... and at the end of my OFP: WIND INFORMATION - OBS ASKY -------------------------------------------------------------------------------- (CLIMB) PIDEP MOMOD (DESCENT) FL320 109/021 -49 FL370 114/014 -55 FL370 114/014 -55 FL320 117/025 -50 FL260 109/019 -34 FL350 121/020 -55 FL350 121/021 -55 FL260 109/022 -34 FL190 107/015 -18 FL330 120/021 -53 FL330 121/022 -53 FL190 101/019 -19 FL130 101/009 -5 FL310 114/018 -48 FL310 114/018 -48 FL130 096/010 -6 6000 106/003 +8 FL290 110/017 -42 FL290 110/017 -42 6000 106/005 +8 Regarding instead the versions of Active Sky (I would like to use it intead of wx2pfpx because suppose AS is a bit more accurate) which version can run as stand-alone? I own ActiveSky Next, Active Sky 2016, ASP4 and ASP3D. If no one of them are stand alone the only chance is to create a dummy installation of FSX/P3D. Any ideas?

Thanks so much, I'll try w2pfpx Does wx2pfpx manage wind aloft? Just now got message in PFPX that Upper winds aloft data are not available. Alternatively I installed ASP3D but can't run it without Prepar3d installed.

As many of you know once PFPX is installed it crashes if you don't enable a proper weather path. In fact, the one inside the program is no longer active and crashes PFPX. I could install ASP3D but, not using P3D anymore, I don't want to install it just to have a snapshot of the weather (current_weather.txt) and that's it. So I ask you if there is some very small free program that could download only the current_weather.txt to connect to PFPX. Is there anything? how do you get around the problem? thank you all in advance

UPDATE: if I use "1" in EZCA instead of "CTRL+1" and in G13 set G1=1 it works prefectly, where is the mistery?

Hi I have an issue with EZCA 3.2.0.3 and the external controller Logitech G13, but it's a very strange behaviour. Never happen before, it happen with V5 on MSFS it works perfectly (but there is no EZCA). So...on EZCA software I assigned CTRL+1,2,3 and so on to different cameras. So on Logitech G13 I made the same: G1=CTRL+1, G2=CTRL+2 and so on. But if I press G1 nothing happen, instead if I press CTRL+1 on the keyboard it works perfectly. So EZCA recognize perfectly the keyboard but not G13. I assume that is not a Logitech G13 issue, because if I assign suppose to G20=V (for take screenshot) or other FS command it works perfectly. Seems to be a conflict with EZCA and Logitech G13, this happen in P3D V5, in V4 (no more installed) and no in MSFS2020 (no EZCA) where it worked perfecty. Any idea or solution? maybe something to do with simconnect? I switched to the last one as suggested for EZCA 3.2 Many thanks in advance, Ric

Any news about P3D V5 update? about 2 years and REX Soft clouds/Worldwide Texture Airport HD are up-to-date only for V4.

In the end I have more confused ideas than before. Is it or is it not possible to update the database? again, the garmin trainer gives you the option to choose Garmin or Jeppesen as the database. How do I see which version my GTN750 is up to?

I’ve used TIR4 for years. But after EZCA came out I immediatly stop using and sold it. FS2020 camera is very similar to EZCA and unless you want to look around continuosly in the cockpit you can forget any tracking system.

Hi, I purchased 2 years ago (before fs2020 came out) the GTN750 for P3D. Does it work either on MFSF2020? And do you know any aircraft who can already integrate it in FS2020.

Hi to all, I have a doubt on auto-detect feature. If I install RXP 750 on Carenado Falcon does it substitude the Carenado's VC panel or simply it add a pop-up windows? On page 4 of the manual it's reported: "Replace any similar GPS gauge with a GTN gauge using an auto-detect feature." I would like to integrate the 750 into VC, have I to do it manually or can be performed with auto-detect feature. Thanks so much, Ric

Thanks so much Rogen, so you too noted a performance lost on ground with GSX? I downloaded GH6 vi Avsim library but it's noted it works with P3D4, do you confirm either with V5?