Jump to content

lowrunner

Frozen-Inactivity
  • Content Count

    49
  • Donations

    $0.00 
  • Joined

  • Last visited

Community Reputation

0 Neutral

Flight Sim Profile

  • Commercial Member
    No
  • Online Flight Organization Membership
    IVAO
  1. wow i didnt know that thanks that will be handy
  2. ok i just got a flight in. i found the problem !!!!!!! :lol: i dont know if this happens to anyone else or not if not i still have some other problem. when i have the fmc up in my ngx and i have that green bar showing where you type your info into my look and view keys "wont work" as soon as i click that green bar thing and make it go away, whaala, i have all my keys functioning again. will some of you guys please try that on your machine and see if its the same way ? and let me know if its not then i would still like to know whats causing it thanks
  3. i cant get enough oxygen thru my nose needed at this point to calm me down !!! the ol lady is hateing this sim like you wouldnt believe, mabe a little bit of me too. HEE- HEE. i know im probably jumping the gun a little but, i reversed my CPU overclock back to stock tried only 1 airport so far and i had all my F-key's. i hope that was my problem we;ll see. ill come back and tell you guys what happens after i try a couple airports and hopefully flights
  4. OK IM ALL BUT DONE WITH THIS B.S. thought i got it working but wrong !!!!!!!!!!!!!!!!!!!!!! none of my F keys work they freeze up when configuring my pmdg 738. once done and looking out windshield thats it the only way i can get virtual or spotview is by right cliking, and even at that i cant even zoom in in spotview i even tried running without any scenery loaded, wideview and wide traffic disabled. also at kgeg in spokane,wa. ( a non ASE airport) only "Linda and fsuipc running. a pretty highend system. the only other thing i did was overclocked my cpu from 3.0 to 4.0 which brought my FPS from 14 to 28. 3 mos. and only 1 flight. if its not one thing its another. anyone know whats going on???? if not , what all will i loose doing a repair im soooo damn mad right now i could spit nails. 50 years old and this isnt doing my blood pressure any good thanks to all that reply oh yea i thought id leave info on my system: Motherboard: ASUS P6X58D Premium CPU: LGA1366 Socket for Intel Core i7 Processor Extreme Edition/Core i7 Processors Chipset: Intel X58 Exress Chipset/ICHIOR System Bus: Up to 6.4 GT/s Intel QuickPath Interconnect Memory: 6 x DIMM,max. 24GB,DDR3 2000(O.C.)/1600/1333/1066 MHz. non-ECC. un-buffered memory Graphic slot: 3 x pci express 2.0 x16 slots (2 x Blue 1 x Grey) (at x16/x8/x8 or x16/x16/x1 mode) 1x PCI Express xl slot 2x PCI slots storage: 6x SATA 3.0Gb/s ports (Blue, RAID O,1.5 and 10) 2x SATA 6.0Gb/s Ports (Gray) 1x eSATA 3Gb/s port (by bracket) Audio: Realtek ALC889 8channel High Definition Audio CODEC LAN: 2x Marvell 88E8056 PCIe Gigabit LAN controller featuring AI NET2 USB: 2x USB 3.0/2.0 ports (Blue, at back pannel 8x USB 2.0/1.1 ports (4 ports at midboard; 4 ports at back pannel IEEE 1394: VIA VT6308P controller supports 2x IEEE 1394a ports (one at mid-board; one at pack pannel) ============================================================================================================================================================================ PROCESSOR: Intel Core i7-950 1366 3.07 GHz ============================================================================================================================================================================ GRAPHICS: EVGA 01G-P3-1371-AR GeForce GTX 460 (Fermi) FPB EE 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card Model Brand EVGA Model 01G-P3-1371-AR Interface Interface PCI Express 2.0 x16 Chipset Chipset Manufacturer NVIDIA GPU GeForce GTX 460 (Fermi) Core Clock 720MHz Shader Clock 1440MHz Stream Processors 336 Processor Cores Memory Effective Memory Clock 3600MHz Memory Size 1GB Memory Interface 256-bit Memory Type GDDR5 3D API DirectX DirectX 11 OpenGL OpenGL 4.0 Ports HDMI 1 x mini HDMI 1.4 DVI 2 x DVI General RAMDAC 400 MHz Max Resolution 2560 x 1600 3D VISION Game Ready Yes SLI Support SLI Ready Cooler With Fan Dual-Link DVI Supported Yes HDCP Ready Yes Card Dimensions 4.376" (H) x 8.25" (L) Features Features NVIDIA PhysX Technology NVIDIA PureVideo HD Technology NVIDIA 2-way SLI Ready NVIDIA 3D Vision Surround Ready NVIDIA CUDA Technology with CUDA C/C++, DirectCompute 5.0 and OpenCL Support Microsoft Windows XP/Vista/7 Support Packaging Package Contents 01G-P3-1371-AR EVGA Driver/Software Disc with EVGA Precision Tuning Utility (1) Mini-HDMI to HDMI Adapter (1) DVI to VGA Adapter (2) 6 pin PCI-E Power Adapter User Guide ============================================================================================================================================================================ MEMORY: CORSAIR DOMINATOR 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Triple Channel Kit Desktop Memory Model TR3X6G1600C8D Model Brand CORSAIR Series DOMINATOR Model TR3X6G1600C8D Type 240-Pin DDR3 SDRAM Tech Spec Capacity 6GB (3 x 2GB) Speed DDR3 1600 (PC3 12800) Cas Latency 8 Timing 8-8-8-24 Voltage 1.65V Multi-channel Kit Triple Channel Kit Heat Spreader Yes Features Compatible with Intel Core i7 series CPU for Intel X58 Motherboard Recommend Use High Performance or Gaming Memory Manufacturer Warranty Parts Lifetime limited Labor Lifetime limited ============================================================================================================================================================================ HDD: "Western Digital Caviar Black 1 TB Bulk/OEM Hard Drive 3.5 Inch, 32 MB Cache, 7200 RPM SATA II WD1001FALS" ============================================================================================================================================================================ Power Unit: CORSAIR CMPSU-750TX 750W ATX12V v2.2 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply Model Brand CORSAIR Model CMPSU-750TX Spec Type ATX12V v2.2 Maximum Power 750W Fans 1 x 140mm double ball-bearing fan PFC Active Main Connector 20+4Pin +12V Rails Single PCI-Express Connector 4 x 6+2-Pin SATA Power Connector 8 SLI Certified CrossFire Ready Modular No Efficiency > 80% Energy-Efficient 80 PLUS Certified Input Voltage 100 - 240 V Input Frequency Range 50/60 Hz Input Current 10A Output +3.3V@30A, +5V@28A, +12V@60A, -12V@0.8A, +5VSB@3.0A MTBF >100,000 Hours Approvals UL, CE, CB, TUV, FCC, CCC Dimensions 5.9"(W) x 3.4"(H) X 6.3"(L) Features Connectors 1 x Main connector (20+4Pin) 1 x 12V(4/8Pin) 8 x peripheral 8 x SATA 2 x Floppy 4 x PCI-E Features Supports ATX12V v2.2 standard and older ATX12V 2.01 spec Ultra-quiet 140mm double ball-bearing fan delivers excellent airflow 80%+ energy efficiency at 20%, 50% and 100% load condition for less heat generation and lower energy bill 99% Active Power Factor Correction provides clean and reliable power to your system Universal AC input 90~264V automatically scans and detects the correct voltage Dedicated single +12V rail offers maximum compatibility with latest components Over Current/Voltage/Power Protection, Under Voltage Protection, and Short Circuit Protection provide maximum safety to your critical system components. High quality Japanese capacitors provide uncompromised performance and reliability. Extra long cables support full tower size chassis. ============================================================================================================================================================================= COOLING: Corsair Cooling Hydro Series H50 High Performance CPU Cooler ============================================================================================================================================================================= TOWER: Thermaltake Spedo VI90001W2Z Full-Tower Case - Clear side with 230mm Fan, Top 230mm Fan, Front USB x2, eSATA and Audio Ports, Black the only other thing is im running 2 of those video cards bridged together or whatever you call it
  5. thanks. i found the problem, it was in my fscuip i accidently had it for just "cockpit forward" when it should have been "virtual Cockpit forward"
  6. for some reason my f9 key stopped working. (AES,FSuicp,Linda,UT2,GEX, Wideview & Widetraffic, Pmdg 738 NGX), ch throttles and pedals and yoke. i thought it was from AES but without it it still did it. i tried a stock airport and still, i tried stock airplane and still. i can get it from my dropdown menue but once i click on f 1o i cant click back to VC any ideas? i dont know what i did or what made this happen. the only thing i have added is a bunch of sceneries for AES. i was going to do a fsx repair since ive had success with that in the past. but if i have to end up doing that i have a few probably wore out questions 1) will i loose all my progs. like AES and credits ect. 2) will i loose any of my addon scenery's and textures what will i loose? its been so long since i did it i dont remember thanks so much for your time
  7. ok i was wrong on my last posting. i finaly figured it out.i always feel like i always want answers but never have answers to contribute. i feel pretty good now cause i now have a answer to the problem of no "wideview or widetraffic"showing up under the dropdown menue in fsx.client computers after trying to configure activesky 2012 on a seperate computer not running fsx.(networking).heres what i have and did: 3-computers running fsx deluxe and wideview & widetraffic (1comp "main"= front view / 1 comp= l.f. view / 1comp.=r.f. view) 1-computer (no fsx) activesky 2012,PAX SDK sp2 update on all as described in documents for setting up a program running on a networked computer, the only computer that gets the "simconnect cfg."file that goes in your "my Documents"folder is the computer thats going to be running the program seperatly from the fsx comps. as with my setup, only the 1-computer gets the cfg. file the 3-comps.running fsx just get the "simconnect XML" file that goes into your fsx appdata folder "NOTE" ANY CFG FILE IN ANY ONE OF THE OTHER COPUTERS "my documents folder" WILL NOT ALLOW YOUR WIDEVIEW OR WIDETRAFFIC TO SHOW UP UNDER THE DROPDOWN MENUE in your clients machines !!!!!!!!!!!!!!!!!!!! although i found that i had duplicate wideview/widetraffic in my server machine dropdown menue in which the duplicates were showing clients in them so i could actually ajust my clients configuration from my server machine be sure to add your comp.name (my preferance)where the address goes in the XML file for the computer your in and port#,protocol "IP4", local or global. now you need to enter same exact info in your simconnect CFG file thats in the one comp. "mydocuments" folder. be sure to add info for each additional computer that contains a xml file on the next simconnect paragraph.same as you did above except you should have a different computer name that reflects your other computer that you want your program to talk to so as with my setup for "Activesky2012" and "PAX" in my cfg file i have 4 simconnect paragraphs filled out all with same info except each one of those has a different comp.name each one matching the comp. name for each seperate computer. only the 4th paragraph for "PAX"had to contain a different port# which was specified by the program i hope this helps people like me that cant seem to pick it up as fast as others and need very basic info. i hope i made it easy to understand anyone feel free to add to or correct anything i might have missed,or to juat simplify it even more thanks for everyone that tries to help.
  8. i dont see anything that says comm,or radio in the fmc/commands. im trying to bring my radio up by a button and not clicking the little square on the dash with the mouse thanks
  9. this plane doesnt seem to offer very many keystrokes to activate switches,unless ive been looking in the wrong places. im trying to program one of my ch switches to bring up the comm radio. any ideas or direction thanks
  10. when i start a flight when i click on enable i hear the voices say "test-Test Ect." then it says "initializing" but it never goes any further any ideas. "windows 7 (Highend comp.) / fsx sp2 / pmdg 737-800 / utx / ut2 / Linda / cpflight mcp/ " thanks
  11. i got it to work. dont know if this was the right way or not but heres what i did: i pulled up both deltas ini files side by side and the delta70 had a long list of error timmers on the bottom where none of my other planes had that in there ini files. so i replaced everything in that ini file with the info from my other delta plane's ini file. so far that seemed to work. i only tried it once since i typed this so hopefully it keeps working
  12. me too! al is good now my three screens now have identical planes and that fixed my problem with lining up my views
  13. i did try uninstalling and re-installing no-go. i compared its cfg to another pmdg plane cfg and they are identical, nothing looked different. so i have no idea whats going on. i looked at both delta70 livery and newer delta livery cfg both are the same. i will however look again thanks for your reply
  14. hey guys, i just recently went into private sceneries post on this page and downloaded the "Delta70 liveries for my 737-800NGX after using the pmdg livery mgr. to load it, i now get this error after choosing this livery and clicking fly . right befor it starts i get this error: "PMDG_737NGX.2dll unloaded" every time i is my favorite livery, is there anything i can do to fix this issue? my other liveries work fine thanks
  15. i did just send a ticket on this issue, but heres what im trying to do. im running 3 pcs. 2nd pc took my 737-800 but my 3rd pc says "max activation" incident# 5960-12181 is there something i can do to make it activate. widetraffic sugjests using same type aircraft on clients as server thats why im doing this i think this is the 4th time activating my 737-800 ngx thank you
×
×
  • Create New...