haztronic

many thanks

Found this for a little more. Seems to provide more info on the parts https://www.amazon.com/6th-Gen-Gaming-Desktop-Computer/dp/B01AWZ0TC6/ref=cm_cr_arp_d_rvw_txt?ie=UTF8

The PSU is 730w. Shows in the specs on the micro center website

I found this site which was recommended as providing great deals on all computer parts and they also sell a few built gaming desktops. This one below all looks fantastic. I would sell the graphics card instantly though and purchase a 980 or 1070 and also need to ask someone who works there what the deal is with the motherboard because it doesn't show one in the specs. Other than that, does this look like a good setup to have to run P3D? http://www.microcenter.com/product/457257/Predator_AG6-710-70001_Desktop_Computer Thanks!

Nevermind, I found a voltage limit option inside the inspector overclock section.

Hi, I have a question regarding a limit to the voltage my card can go up to. I use precision x and FSX always seems to crash when it boosts the voltage up to 1013, however, if when I am using FSX and it keeps the voltage at 0965, then it never crashes and is fine. However, I don't know how to stop precision x from automatically jumping up to 1013 volts. Is there a program out there where I can just keep the voltage at 0965 to below 1000 without it going up to 1013? The card is a 580GTX Really would like some help. Thank you.

Hi, recently, out of the blue, whenever I use my joystick to pan around the cockpit or external view, it pans extremely sluggish and because of this, stutters. Even though I am getting a clean 30 or 40 fps constantly. It's odd because it literally started to happen when I restarted my sim. If I hold spacebar and move my mouse to pan, everything is smooth and looks great, but obviously I much prefer to use my joystick for the panning as its easy to do while flying. Does anybody know how to fix this? Is it a camera.cfg fix? Something else.... Really hoping for some insight. I've attached a video showing you what I am talking about, its hard to tell from the video, but the panning is sluggish, and does stutter and its not to the 30 or 40 fps it displays in the corner. Normally with that many FPS, when I pan, it's very smooth and somewhat fast also, not slow like you see in the video. I run at 4Ghz with a 580GTX, Many thanks! By the way, ignore the crazy textures, easy fix. http://vid379.photob...zpsa2elqlsa.mp4

Hi, recently, out of the blue, whenever I use my joystick to pan around the cockpit or external view, it pans extremely sluggish and because of this, stutters. Even though I am getting a clean 30 or 40 fps constantly. It's odd because it literally started to happen when I restarted my sim. If I hold spacebar and move my mouse to pan, everything is smooth and looks great, but obviously I much prefer to use my joystick for the panning as its easy to do while flying. Does anybody know how to fix this? Is it a camera.cfg fix? Something else.... Really hoping for some insight. I've attached a video showing you what I am talking about, its hard to tell from the video, but the panning is sluggish, and does stutter and its not to the 30 or 40 fps it displays in the corner. I run at 4Ghz with a 580GTX, Many thanks! By the way, ignore the crazy textures, easy fix. http://vid379.photobucket.com/albums/oo231/simmingaccount/IMG_0754_zpsa2elqlsa.mp4

Hi everyone, so 90% of the time I use payware aircraft that have some type of FMC, but in some aircraft, like Carenado's phenom, the navigation system is a G1000, so in PFPX I will create a flightplan and export it to the MSFX folder. Inside FSX I will load this plan up in the flight planner page, but once its loaded, half of my fixes aren't even loaded. Why is this and is there anyway for it to load exactly what I have planned in PFPX. Incase I am not being clear, lets say I have planned a departure with the final fix of the departure being CPT VOR, and then the plan follows with various fixes and VORs. When I load this into the FSX planner, it will leave out a bunch of the vital fixes and just skips straight to the CPT VOR for instance.Very frustrating. If anybody knows of a solution, i'd love to hear it P.S. i was just using pfpx as an example of the tool i use, but it does this with any prior planner i use. Thanks!

Hello, I use the windowed vsync tweak in my fsx, i have the forcewindowedvsync in my .cfg and also created the batch file. My question though is what do I set the vsync setting to in NI? Currently I have it to force off because of the tweak in my .cfg Is this wrong or correct? Thank you!

Hi everyone, I have a question regarding the sound coming from my asus 27inch monitor, i have none! I use a dvi cable from the desktop to my monitor, and i used to have a pair of logitech speakers which worked fine, but now I no longer have them. How do I get sound from my desktop to monitor? Do i need some type of other cable? I tried an aux chord but that didn't work either. Thanks!

Hi everyone, I recently got forcewindowedvsync correctly working and performing well, i created the .bat file but my question is, do i have to have aero enabled for this to work? i like the classic look but i feel like this will make the vsync tweak stop working. is that the case? Thank you

How much better is the 980 over the 970 because like you are all saying, the price of the 970 is wonderful. I have a 580 right now and need to replace quite soon.

Here are my NVidia inspector settings.

Not tried it yet. I wanted to get DX10 but the software to buy it i don't believe is available anymore?