Grahm

Anyone with an updated file? As in updated airports and weights 🙂

How would I get sounds from a virtual cockpit to the 2D cockpit? I recently purchased the QW787 and the 2D cockpit has outside sounds instead of cockpit sounds. How would I get the same VC sounds into the 2D cockpit?

Does anyone out there have the airport SEGS with the ils added to it? Thank you.

Here's your 2D panel. Mike Warren

My oil quantity in the #2 engine is always lower than the #1 engine. Even topping it off and after a 4 hour flight #2 is lower by 2%. After substantial flying 50 to a 100 hrs the engine oil in the # 2 burns so much more oil then #1 and requires a fill up below 76%. I cycle between 1 and 2 at engine start. Anyone else experience this type of consistency? Mike Warren

Thank you to all. Michael Warren

Since "generate routes" is down at simroutes.com It's cumbersome planning a flight. When entering the route into the NGX FMC and saving it, why doesn't it create and load the route into ASN (Active Sky Next) like it does for the 777? Or is this a feature I need to enable? It sure would be nice if it did. Michael Warren

Here you go: http://library.avsim.net/esearch.php?CatID=fsxutil&DLID=180540 works well, free and efficient. Enjoy, Michael Warren

The "Saitek PRO Flight Yoke" you have listed does not turn a full 180 degrees, Only 45 degrees left and 45 degrees right with a total of 90 degrees if that matters. That was a deciding factor for me in which prompted me not to purchase. http://www.saitek.com/uk/prod/yoke.html This yoke turns 90 degrees left and 90 degrees right for a total 180 degrees: "Saitek Pro Flight Cessna Yoke System" which I just purchased a month ago. Works well. About $U.S.284 with the throttles on Amazon. Hope this helps. http://www.saitek.com/uk/prod/cessnayoke.html Michael Warren

Well coming to find out, it was a big heat issue. I've had it for years and never realized it. That explains why the frame rate drop. I have since cleaned off my heat sink and reapplied Artic Silver 5 Thermal Paste and a HUGE night and day difference. I am currently running smooth at 60fps + @ maxed out in detail with a core temp of 50 degree Celsius at max load. I'm in love all over again! Heat Kills! I would still like to bump my clock up to 4.5ghz! I need a walk thru though. I also have that fan on the way! Thank you

FSX SP2 with ASX on Windows 7 Home Premium Running a i5 2500K CPU @ 3.30GHZ 3.60GHZ 16GB RAM 1TB hard drive. Video Card is a ATI Technologies AMD Radeon HD 6800 Series. All my scenery settings in FSX are on low and im getting 25 to 50 fps with drops of 1.5 to 10fps in turbulence for some reason. (What I have noticed) With all my settings up on HIGH im getting at most 15fps. Is it my system or my video card? I would give anything to have a smooth running FSX with sliders to the max or even half way.

Ahhh ok. But noway to incorporate the double chime crossing 10K? I know you can manually but that takes the fun out of it.

I know the NGX chimes once at 10K ft. Why not a double chime crossing 10K ft that most airlines use? Michael Warren

Hope this helps, United SubCO 737 inflight I also have noticed UA SubCO 737's-738's use the Honeywell and the 737-900/ER use the Collins MCP

Sorry to bump a really old thread. I am trying to add a weather station to ASN. Ex: SEQM. I add info to the fields and save. Restart and pull it back up and its gone. Anyone have any ideas?