Cap737Jon

Does anybody have the files for this anymore? It's not in the Ops Center anymore. It was my favorite livery to fly. Thanks all. Jon

I am looking for someone to help me out. I would like to have GSX service with Northwest Airlines. To be able to park at a gate and be serviced in my NWA plane by NWA ground service. I can supply you with all pictures needed. It's a simple paint job, I just don't have the programs to do this. This will be for P3D v4. If willing to help, please let me know. Your work will be featured on my streams on Twitch so be ready for a lot of requests for work. ;-) Serviced by TAM Serviced by Delta Thank you all for at least looking. Jon

When I don't close those the FUEL TANK/ENG comes up. I'll give it another try and see what happens. Thank you all for the fast replies. All fuel is balanced with in .1 I'll have to give this another shot. Jon

Hey everyone. I can't seem to figure out what the heck this plane wants from me. I'm sure I'm missing something simple. Everything on... gets this.... All XFEED off.. Gets this... So what do I need to do here?? Thanks, Jon

Hmm Every time I take off from anywhere, I have about 1.4 - 1.5GB VAS left. I went from KMSP to KSFO and I'm sitting at .16 and dropping. ALL settings set to far left. All programs closed. I cant figure out what is going on. Just took off out of KSFO had 1.45. Just going through 6000 and already down to .98. Jon

Thank you. Even did a bunch of searches... Wrong phrasing I guess.. Jon

Anyone know if it has been made yet? Jon

Well, I just restarted the sim and CP and everything works now...:\ At least it works now... Thank you for the fast replies, Jon

Yes sir. 2 times. Jon

Good morning. Just wanted to see if anyone else is having this issue. I just started up the sim today and went to set some new views. All of my in cockpit views work, along with my PS4 controller I use to move around in there. As soon as I attempt to go out side of the plane, none of the views stopped working. I could see in the preset window that they were selecting but all it did was go outside and go to spot view. Also my controller did not work anymore. I went into the sim controls to make sure something didn't get reassigned to the keys I was using to chose the views and deleted everything view related. Still nothing worked. As soon as I selected a internal view everything worked as it should. Seems the outside views are all messed up. Here is the report file.... Report: ------------------------------------------------------------------------------------------------------ --------------- ChasePlane Report by *********@gmail.com on 3/2/2017 4:34:54 PM UTC --------------- ------------------------------------------------------------------------------------------------------ Version: 0.1.638 PLV: 0.1.638 OS: Microsoft Windows 10 Home .NET: 4.6 RC or later Running Sim: P3D 3.4.14.18870 Supported Current aircraft: PMDG 747-400 Current aircraft cfg: F:\P3D\P3D Sim\SimObjects\Airplanes\PMDG 747-400\aircraft.cfg ---------------------------------------------------- --------------- Installed Simulators --------------- ---------------------------------------------------- P3Dv3 "F:\P3D\P3D Sim\" ------------------------------------------- --------------- Preferences --------------- ------------------------------------------- experimental_version = True ui_refresh_ms = 500 ui_anim_duration = 0.4 view_sel_anim_in_ms = 0.2 view_sel_anim_out_ms = 0.1 view_sel_delay = 300 minimize_taskbar = True x_to_minimize = False mouse_middle_view_switcher = True turb_pause_ms = 1 always_on_top = False debug_show = False vas_show = True vas_warning = True vas_remaining = True vas_warning_treshold = 400 turb_wind_amplitude = 1 startup_glob_enable = True app_auto_launch = True mouse_middle_cam_look = True mouse_middle_cam_zoom = False pause_turbs_on_mousemove = False pause_turbs_in_slew = True doors_enabled = False mode_cinematic_ctrl_speed = 0.99999994949301 mode_cinematic_ctrl_inertia = 2.99999979797204 mode_cinematic_duration = 30 mode_cinematic_distance = 1 mode_cinematic_delay = 10 mode_cinematic_vas_protection = True boostFactor = 10 joystick_default_dead_zone = 100 user_statistics = True auto_cpu_afinity = True cpu_afinity = 1 show_whats_new = True disable_advanced = False enable_trackir = False trackir_reset = True translucent_window = False user_defaults = ------------------------------------------------------------- --------------- Aircraft's Camera Definitions --------------- ------------------------------------------------------------- CFG created on 2/10/2017 8:23:19 PM UTC CFG modified on 2/10/2017 8:48:32 PM UTC [CameraDefinition.000] Title = "Right Overwing" [CameraDefinition.001] Title = "Left Overwing" [CameraDefinition.002] Title = "Right Engine" [CameraDefinition.003] Title = "Left Engine" [CameraDefinition.004] Title = "Right Wing Forward" [CameraDefinition.005] Title = "Left Wing Forward" [CameraDefinition.006] Title = "Upper Deck Right Wing Forward" [CameraDefinition.007] Title = "Upper Deck Left Wing Forward" [CameraDefinition.008] Title = "Right Wing Aft" [CameraDefinition.009] Title = "Left Wing Aft" [CameraDefinition.010] Title = "Tail Camera" [CameraDefinition.011] Title = "Nose Camera" [CameraDefinition.012] Title = "Right Wing Tip" [CameraDefinition.013] Title = "Left Wing Tip" [CameraDefinition.1] Title = "F/O Seat" [CameraDefinition.2] Title = "Overhead Upper Panel" [CameraDefinition.3] Title = "Overhead Lower Panel" [CameraDefinition.4] Title = "Pedestal" [CameraDefinition.5] Title = "Throttle Quadrant" [CameraDefinition.6] Title = "Lower EICAS and Left/Right CDU" [CameraDefinition.7] Title = "Observer 2 Seat" [CameraDefinition.8] Title = "Observer 1 Seat" ---------------------------------------------------------- --------------- Cameras.cfg file for P3Dv3 --------------- ---------------------------------------------------------- CFG created on 12/3/2016 1:47:15 AM UTC CFG modified on 3/2/2017 3:48:07 PM UTC [CameraDefinition.022] Title=On-Board(ChasePlane) HotKeySelect=1 [CameraDefinition.023] Title=Outside(ChasePlane) HotKeySelect=3 [CameraDefinition.024] Title=Static(ChasePlane) HotKeySelect=5 [CameraDefinition.025] Title=Gimbal(ChasePlane) HotKeySelect=8 [CameraDefinition.001] Title=Cockpit HotKeySelect=2 //[CameraDefinition.002] //Title=VirtualCockpit //HotKeySelect=1 [CameraDefinition.003] Title=Spot [CameraDefinition.004] Title=LockedSpot //HotKeySelect=3 [CameraDefinition.005] Title=FlyBy [CameraDefinition.006] Title=Top-Down //HotKeySelect=4 [CameraDefinition.007] Title=NearestTower NoSortTitle=True [CameraDefinition.008] Title=FacilitiesTower [CameraDefinition.009] Title=FacilitiesRunway [CameraDefinition.010] Title=AIPlanes [CameraDefinition.011] Title=MultiplayerPlanes [CameraDefinition.012] Title=IR(WhiteHot) [CameraDefinition.013] Title=IR(BlackHot) [CameraDefinition.014] Title=NVG(WhiteHot) [CameraDefinition.015] Title=NVG(BlackHot) [CameraDefinition.016] Title=Weapons [CameraDefinition.017] Title=Static [CameraDefinition.018] Title=RadarCamera [CameraDefinition.019] Title=VRCockpit [CameraDefinition.020] Title=VRVirtualCockpit [CameraDefinition.021] Title=DISEntities --------------------------------------------- --------------- END OF REPORT --------------- --------------------------------------------- Thank you all, Jon

I forget, How do you open a support ticket again? Jon

Amazing!!! TOTALLY cant wait!!! Northwest Airlines will be alive again!!!!! JF

So I'm installing my planes again after a hard drive crash. I got the 744 installed again but it keeps coming up with error can not locate the main.dll, overhead.dll and one other .dll I attempted a repair install but did not work. What am I doing wrong? Jon

I changed the backlighting to white and flood lighting silver. The green was ok but wanted to go custom with it. As for the rest I'm not saying this is normal or a every flight thing it's just something I noticed and wanted to say something about. That's all. Jon It was my FSUIPC having a issue. That's why I was having such harsh wind changes. Jon

My video on Twitch @ 6:09:48 shows it. I was having weather issues. I normally wouldnt post my videos here but to show you what I saw.... http://www.twitch.tv/jonfocus03/c/6209832 (made a highlight) Jon TAS was 585 at Fl370 computed on http://www.hochwarth.com/misc/AviationCalculator.html it checks with a mach of 1.020(rounded up) Jon