kramerdc9

No problems guys. Glad it's working for your.

Hey guys, it's been a while since I last posted on this but I did find a fix for this since Alebeo doesn't have one. When you load up the aircraft, immediately press shift 5 and the select cold and dark. After that, all you have to do is start the aircraft and you shouldn't have the problem anymore. At least this is working for me. Hope this helps.

Well I thought that fixed it, but I flew it once again using the red and white aircraft and still experienced it. Funny, didn't do it previous few flights using that aircraft. Will try to contact alabeo and get an update. Sorry.

Ok guys, I think I figured out is causing the issue. When I first received the aircraft, I had no problems with the gear warning until I chose a different model. Some models create this problem. The one I'm not having problems with is the very last one- red and white. I'll contact Alabeo and let them know about the issue. Hope this helps.

Hi guys. I'm testing this product out before purchasing and was wondering why I can't get any wind or weather info. I have a altitude and destination filled out. I always get a degree and 0kt wind. I must be doing something wrong. I don't think every location I go to should display same info. Anyways, if anybody could help me out so I can use it a little before purchasing, I would greatly appreciate it. Thanks in advance.

Okie Dokie Ron, will wait and never thought about the time difference. Thanks for your help.

Thanks bladderboy, unfortunately already tried over there and didn't even get any views. Thought I'd try to post my question over here.

Using FTX Global with P3D and will most likely uninstall it when a new patch comes for P3D since I don't want to use the patch upgrade, rather a new installer for P3D. If I choose to uninstall FTX Global, could someone explain me the steps needed for a complete uninstall? I have the uninstaller and made a backup folder, but I'm confused how to do it. I read the instructions that came with the uninstaller, but am confused. I just want to make sure the program is uninstalled correctly so I can do a reinstall with nothing left over. Any help would be greatly appreciated and thanks in advanced.

Interesting, I still can't access site. So something is definitely happening on their end. I appreciate you guys giving me some more info on this. I guess all I can do is wait. Thanks for clarification. Cheers.

Has anybody else experienced not being able to access the P3D website? I've tried now for a day and still can't access it. Just says it can't be displayed. Tried Ie11 and Chrome, no difference. I need to re-download 2.4 and can't get into my account. If anybody has any info or can confirm that it's happening on their end, please let me know. Thanks.

Hey Angelo, don't know if your using a ssd but that can help with loading times as well as faster ram. Of course a fast cpu(fsx and p3d loves overclocking) and good gpu is a must. If your using fsx, make sure that HIGHMEMFIX=1 under graphics is in the fsx.cfg(probably knew this already but just thought I'dlist it in case). Without knowing more about your system, I'm afraid this is all I can come up with. I know some people might disagree with what I'm going to say but if you haven't already, take a look at Nick N FSX BIBLE. Took along time to go through, but well worth the time and effort. It has saved me the frustration of getting FSX configured right. Just my .02cents worth. Hope this helps. -Cheers Hey domkle, thanks for the input into P3D. Your tempting me into getting the program. Just like yourself, I have been simming since 1985 when there was sublogic and I believe the 1st Microsoft flight sim. So I'll take your word of advice that P3D is a better program based on your experience. As far as Orbx forums, I contacted someone with a physical email address and he has been helping me. I still can't get into them. In fact, the last time I tried to log on, I wasn't even identified which makes me believe there is something wrong on their end. I'm sure it will be worked out. Again, thanks for your help and words of advice. P.S. -I'll take the pipe out when I enter Orbx forums.

Hey domkle, what I'm about popping is the autogen. As far as looking at my computer, I'm not sure what to look for. I've set everything up for FSX according to Nick N suggestions, so I don't think it's my computer itself. When you say you have 1.30, is that for FSX or P3D? Because if it's for FSX, then there's gotta be something wrong with either my setup or program itself.

Well that's unfortunate news. I knew FSX had a problem but read a thread from John Venema that the popping was suppose to be gone. Google FTX Global 60 sec video vanilla FSX default vs FTX Global. The video does show no popping. Just to be fair, I did make a vanilla install of FSX. This was one of the reasons I decided to purchase FTX Global. As far as their forums, I registered 3 days ago and still am being validated. How long does this take? I've never come across a company that has taken this long to register. I've been hesitant switching over to P3D. I've heard of things not being compatible and crashing and some say the advantages over FSX are few. Aside from fixing the problem with FTX Global, how hard is it to switch and will I notice anything different besides the shadows (which do look cool)? I know P3D is a little off topic in this forum, but I'd thought I'd just ask since it was brought up. Thanks for your help and hopefully I can get into the ORBX forums soon.

I applied the Orbx libs update but that didn't help with the popping. Thanks for the suggestion. I feel like I may have wasted $89.99 on a product which I can't enjoy viewing the scenery. The popping is so bad that all I want to do is look at my instruments and not the scenery. I really don't want to revert back to MGE as I enjoy the scenery, just not the popping. Anybody else have any suggestions?

I just purchased FSX Global and have noticed that everywhere I fly, the scenery keeps popping up. I believe since I just bought FTX Global, that it would have the latest service pack 1.30. I don't think it's my computer. My computer is a i5 4570k oc to 4.2ghz and a 770gtx. I'm only using the A2A 172R for the flying. I also have FSX and FTX Global on a dedicated hdd that's been defragged. ORBX is new to me and thought I'd purchase global since I don't want to be restricted having to buy separate photo scenery areas. I have watched many youtube videos and haven't noticed any popping up scenery. If anybody knows anything about this and how to fix it, it would be greatly appreciated. Thanks in advance. -Cheers